From: Danny.Andaluz@triaton-na.com
Date: Thu Oct 02 2003 - 18:42:35 GMT-3
I just thought about this some more. I'm thinking that the hello-interval
being so low also falls in line with "ospf converging within 5 seconds in
the event of a topology change". Changing the hello interval also increases
the dead time to 4 seconds (less than 5 seconds). This has to be it. (I
think).
Danny
-----Original Message-----
From: Andaluz, Danilo, Triaton/NA
Sent: Thursday, October 02, 2003 5:37 PM
To: ccielab@groupstudy.com
Subject: OSPF SPF Timers
Hey, Fellas. I'm doing a lab and the requirement says:
"All Area 0 routers should re-converge within 5 seconds in the event of a
topology change."
I checked the final config on this one what they have is:
int e0
ip ospf hello interval 1
router ospf 1
timers spf 0 0
Are the interface command and the ospf command related. I tried looking
looking at Doyle's book and Parkhurst's book, but they don't say much. The
Doc CD says less. I understand that the SPF timer being so low will make
the router run the SPF algorithm instantly, but does the hello-interval need
to be so low?
Thanks,
Danny
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:56 GMT-3