From: christopher snow (cbsnow31@yahoo.com)
Date: Wed Oct 01 2003 - 08:44:18 GMT-3
Hey,
If you have a 3550 in your lab, I will trade you voice
and ATM time for some 3550 time. I have to wait until
after Christmas to get a 3550 since Santa Claus is
comming soon and I have to pay him...:) My rack can
be hit via the net and I have two MC3810s (12.2T) with
FXS and FXO ports and two OC-3 ATM modules in a 4500-M
and a RSP7000 (ATM switch is FORE/Marconi). Code is
12.1 and 12.2. Not too much has changed on ATM and
voice on the 12.2T code (2600 platform) so you can do
most overthing with my setup. LMK....
Chris Snow
--- Ian Stong <istong@stong.org> wrote:
> You need to buy both the network module and the
> voice cards. Either an
> NM-1V or NM-2V will work with the VIC-2FXS cards.
> As for ATM there is a
> card for that as well for the 2621 such as the DS3 -
> nm-1a-t3
>
> www.cisco.com/go/module is a great resource to find
> modules that fit
> inside the router. You can search by part number or
> just specify the
> router model you have.
>
> Ian
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Yunming Song
> Sent: Tuesday, September 30, 2003 8:13 PM
> To: ccielab@groupstudy.com
> Subject: VoIP & ATM?
>
> Hi Group,
>
> I have two Cisco 2621 routers and try to build voip
> lab,
> do I just need to buy vic-2fxs cards or need both
> nm-1v modules and vic-2fxs cards?
>
> I am also trying to build simple ATM lab, is there
> any OC-3 ATM
> interface
> card,
> like ISDN or T1 interface card, which can be used
> for 2621?
>
> Your advice is pretty much appreciated.
>
> thanks,
> Yunming Song
>
>
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:54 GMT-3