From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Oct 01 2003 - 01:02:02 GMT-3
If cost is an issue, just buy a NM-1V and VIC-2FXS for one router. On
another router (that supports voice i.e. 2610) use it to create a
"dial-peer <tag> voip" to the router with the NM-1V and VIC-2FXS. Use
the router with the NM-1V and VIC-2FXS to practice all the "dial-peer
<tag> pots" configurations and the other router to practice connecting
to it using the "csim start" command.
If cost is more of an issue, just buy a couple uBR924's. Actually you
could technically get away with just one uBR924 if you also have a 2610
or better.
As far as ATM goes just rent rack time for it.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Yunming Song
Sent: Tuesday, September 30, 2003 5:13 PM
To: ccielab@groupstudy.com
Subject: VoIP & ATM?
Hi Group,
I have two Cisco 2621 routers and try to build voip lab,
do I just need to buy vic-2fxs cards or need both
nm-1v modules and vic-2fxs cards?
I am also trying to build simple ATM lab, is there any OC-3 ATM
interface
card,
like ISDN or T1 interface card, which can be used for 2621?
Your advice is pretty much appreciated.
thanks,
Yunming Song
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:54 GMT-3