From: CHINMAY (routereng2@idbibank.com)
Date: Tue Sep 30 2003 - 00:33:21 GMT-3
Try using "broadcast " in dialer map config under BRI in R5.
Regards
chinmay
"Charles T. Alexander" wrote:
> Still having problems with IPExpert #31
>
> I have full connectivity when all circuits are up, but if I fail the r2
> serial link to r5 (at the frame switch) the Bri comes up but, my
> connecivity goes away, that is routes are not be distributed between
> ospf and rip.
>
> I have attached config for r2 and r5 and the the debug ip rip for both
> which seem to me to say that all routes are being passed on r5 but not
> processed on r2.
>
> r5#r
> Building configuration...
>
> Current configuration : 4687 bytes
> !
> version 12.1
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r5
> !
> logging buffered 10000 debugging
> enable password radnor
> !
> username r2 password 0 ctasta
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> ip multicast-routing
> isdn switch-type basic-ni
> !
> key chain chucko
> key 1
> key-string chucko
> !
> !
> !
> !
> dlsw local-peer peer-id 192.168.5.5 promiscuous
> dlsw icanreach mac-address 0005.0005.0005 mask ffff.ffff.ffff
> dlsw bridge-group 1
> !
> interface Loopback0
> ip address 192.168.5.5 255.255.255.0
> !
> interface BRI0/0
> ip address 172.31.25.5 255.255.255.0
> ip rip authentication mode md5
> ip rip authentication key-chain chucko
> encapsulation ppp
> dialer idle-timeout 600
> dialer map ip 172.31.25.2 name r2
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40822222221
> isdn spid2 40822222222
> ppp authentication chap
> !
> interface Ethernet0/0
> ip address 172.31.200.5 255.255.255.128
> no ip redirects
> ip pim sparse-dense-mode
> ip igmp join-group 231.1.1.1
> bridge-group 1
> !
> interface TokenRing0/0
> no ip address
> shutdown
> ring-speed 16
> !
> interface Serial1/0
> no ip address
> encapsulation frame-relay
> serial restart-delay 0
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> !
> interface Serial1/0.52 point-to-point
> ip address 172.31.52.5 255.255.255.252
> ip rip authentication mode md5
> ip rip authentication key-chain chucko
> frame-relay interface-dlci 501
> !
> interface Serial1/0.546 multipoint
> ip address 172.31.100.5 255.255.255.240
> ip pim sparse-mode
> frame-relay map ip 172.31.100.4 504 broadcast
> frame-relay map ip 172.31.100.5 504
> frame-relay map ip 172.31.100.6 506 broadcast
> !
> interface Serial1/1
> no ip address
> shutdown
> serial restart-delay 0
> !
> interface Serial1/2
> no ip address
> shutdown
> serial restart-delay 0
> !
> interface Serial1/3
> no ip address
> shutdown
> serial restart-delay 0
> !
> router ospf 1
> router-id 192.168.5.5
> log-adjacency-changes
> area 0 range 172.31.100.0 255.255.255.0
> area 1 range 172.31.200.0 255.255.255.0
> area 1 virtual-link 192.168.6.6
> area 1 virtual-link 192.168.7.7
> redistribute connected subnets route-map c2o
> redistribute rip subnets route-map r2o
> network 172.31.100.0 0.0.0.15 area 0
> network 172.31.200.0 0.0.0.127 area 1
> network 192.168.5.5 0.0.0.0 area 5
> neighbor 172.31.100.6
> neighbor 172.31.100.4
> !
> router rip
> version 2
> timers basic 30 180 0 240
> redistribute connected metric 1 route-map c2r
> redistribute ospf 1 metric 2 route-map o2r
> passive-interface Ethernet0/0
> passive-interface Serial1/0.546
> network 172.31.0.0
> default-information originate route-map conditional-default
> no auto-summary
> !
> router bgp 5678
> no synchronization
> bgp log-neighbor-changes
> aggregate-address 192.168.112.0 255.255.252.0
> neighbor pg567 peer-group
> neighbor pg567 remote-as 5678
> neighbor pg567 update-source Loopback0
> neighbor pg567 send-community
> neighbor 192.168.2.2 remote-as 12
> neighbor 192.168.2.2 ebgp-multihop 2
> neighbor 192.168.2.2 update-source Loopback0
> neighbor 192.168.2.2 prefix-list to2 out
> neighbor 192.168.4.4 remote-as 4
> neighbor 192.168.4.4 ebgp-multihop 2
> neighbor 192.168.4.4 update-source Loopback0
> neighbor 192.168.4.4 prefix-list to4 out
> neighbor 192.168.6.6 peer-group pg567
> neighbor 192.168.7.7 peer-group pg567
> no auto-summary
> !
> ip classless
> ip http server
> ip pim rp-address 192.168.5.5
> !
> !
> ip prefix-list to2 seq 10 deny 192.168.112.0/24
> ip prefix-list to2 seq 15 deny 192.168.112.0/22
> ip prefix-list to2 seq 20 permit 0.0.0.0/0 le 32
> !
> ip prefix-list to4 seq 25 permit 192.168.112.0/22
> access-list 1 permit 192.168.8.8
> access-list 2 permit 192.168.1.0 0.0.0.255
> access-list 2 permit 172.31.12.0 0.0.0.255
> access-list 2 permit 192.168.2.0 0.0.0.255
> access-list 2 permit 172.31.10.0 0.0.0.255
> access-list 3 permit 192.168.5.5
> access-list 3 permit 172.31.25.0 0.0.0.255
> access-list 3 permit 172.31.52.4 0.0.0.3
> access-list 3 permit 172.31.100.0 0.0.0.128
> access-list 4 permit 172.31.0.0 0.0.255.255
> access-list 4 permit 192.168.0.0 0.0.255.255
> dialer-list 1 protocol ip permit
> route-map c2r permit 10
> match ip address 3
> !
> route-map r2o permit 10
> match ip address 2
> !
> route-map o2r permit 10
> match ip address 4
> !
> route-map conditional-default permit 10
> match ip address 1
> set interface Serial1/0.52
> !
> route-map c2o permit 10
> match ip address 3
> !
> !
> bridge 1 protocol ieee
> alias exec i show ip route
> alias exec r show run
> alias exec c config t
> alias exec u undebug all
> alias exec b show ip bgp
> alias exec bs show ip bgp sum
> alias exec s show ip int brief
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> escape-character 27
> line aux 0
> line vty 0 4
> exec-timeout 0 0
> password bp
> login
> !
> end
>
> r5#
>
> r5#
> 21:34:54: RIP: received packet with MD5 authentication
> 21:34:54: RIP: received v2 update from 172.31.25.2 on BRI0/0
> 21:34:54: 172.31.10.0/24 via 0.0.0.0 in 2 hops
> 21:34:54: 172.31.12.0/24 via 0.0.0.0 in 1 hops
> 21:34:54: 192.168.1.0/24 via 0.0.0.0 in 2 hops
> 21:34:54: 192.168.2.2/32 via 0.0.0.0 in 1 hops
> 21:34:54: RIP: Update contains 4 routes
> r5#
> 21:35:06: RIP: sending v2 update to 224.0.0.9 via BRI0/0 (172.31.25.5)
> 21:35:06: RIP: build update entries
> 21:35:06: 172.31.40.0/24 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.69.0/24 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.78.0/24 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.80.0/24 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.90.128/28 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.100.0/24 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.100.0/28 via 0.0.0.0, metric 1, tag 0
> 21:35:06: 172.31.200.0/24 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 172.31.200.0/25 via 0.0.0.0, metric 1, tag 0
> 21:35:06: 192.168.4.4/32 via 0.0.0.0, metric 2, tag 0
> r5#
> 21:35:06: 192.168.6.6/32 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 192.168.7.7/32 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 192.168.8.8/32 via 0.0.0.0, metric 2, tag 0
> 21:35:06: 192.168.9.9/32 via 0.0.0.0, metric 2, tag 0
> 21:35:06: RIP: Update contains 14 routes
> 21:35:06: RIP: Update queued
> 21:35:06: RIP: Update sent via BRI0/0
> r5#
>
> r2#r
> Building configuration...
>
> Current configuration : 2915 bytes
> !
> ! Last configuration change at 17:36:21 UTC Thu Mar 4 1993
> ! NVRAM config last updated at 19:13:33 UTC Thu Mar 4 1993
> !
> version 12.2
> no service single-slot-reload-enable
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname r2
> !
> logging buffered 10000 debugging
> logging rate-limit console 10 except errors
> enable password radnor
> !
> username r5 password 0 ctasta
> ip subnet-zero
> no ip finger
> no ip domain-lookup
> !
> no ip dhcp-client network-discovery
> isdn switch-type basic-ni
> !
> key chain chucko
> key 1
> key-string chucko
> !
> !
> !
> !
> interface Loopback0
> ip address 192.168.2.2 255.255.255.255
> !
> interface Loopback1
> ip address 24.24.24.24 255.255.255.0
> !
> interface Ethernet0
> ip address 172.31.12.2 255.255.255.0
> ip rip send version 1
> ip rip receive version 1
> ip summary-address rip 172.31.52.0 255.255.255.0
> !
> interface Serial0
> backup delay 5 5
> backup interface BRI0
> ip address 172.31.52.6 255.255.255.252
> ip rip authentication mode md5
> ip rip authentication key-chain chucko
> encapsulation frame-relay
> ip split-horizon
> frame-relay map ip 172.31.52.5 105 broadcast
> frame-relay map ip 172.31.52.6 106
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> !
> interface Serial1
> no ip address
> shutdown
> !
> interface BRI0
> ip address 172.31.25.2 255.255.255.0
> ip rip authentication mode md5
> ip rip authentication key-chain chucko
> encapsulation ppp
> dialer idle-timeout 600
> dialer map ip 172.31.25.5 name r5 broadcast 4082222222
> dialer-group 1
> isdn switch-type basic-ni
> isdn spid1 40811111111
> isdn spid2 40811111112
> cdapi buffers regular 0
> cdapi buffers raw 0
> cdapi buffers large 0
> ppp authentication chap
> !
> router rip
> version 2
> timers basic 30 180 0 240
> passive-interface Loopback0
> network 172.31.0.0
> network 192.168.2.0
> no auto-summary
> !
> router bgp 12
> no synchronization
> bgp log-neighbor-changes
> network 24.24.24.0 mask 255.255.255.0
> neighbor 192.168.1.1 remote-as 12
> neighbor 192.168.1.1 update-source Loopback0
> neighbor 192.168.5.5 remote-as 5678
> neighbor 192.168.5.5 ebgp-multihop 2
> neighbor 192.168.5.5 update-source Loopback0
> neighbor 192.168.5.5 route-map to24 out
> no auto-summary
> !
> ip kerberos source-interface any
> ip classless
> ip http server
> !
> access-list 1 permit 24.24.24.0 0.0.0.255
> dialer-list 1 protocol ip permit
> route-map to24 permit 10
> match ip address 1
> set metric 15
> set as-path prepend 12 12 12
> !
> route-map to24 permit 20
> !
> !
> alias exec i show ip route
> alias exec r show run
> alias exec c config t
> alias exec u undebug all
> alias exec b show ip bgp
> alias exec bs show ip bgp sum
> alias exec s show ip int brief
> !
> line con 0
> exec-timeout 0 0
> logging synchronous
> transport input none
> escape-character 27
> line aux 0
> line vty 0 4
> exec-timeout 0 0
> password bp
> login
> !
> ntp authentication-key 23 md5 13061F0708070B 7
> ntp authenticate
> ntp trusted-key 23
> ntp clock-period 17180006
> ntp server 192.168.1.1 key 23
> end
>
> r2#
>
> r2#
> 4d15h: RIP: sending v2 update to 224.0.0.9 via BRI0 (172.31.25.2)
> 4d15h: RIP: build update entries
> 4d15h: 172.31.10.0/24 via 0.0.0.0, metric 2, tag 0
> 4d15h: 172.31.12.0/24 via 0.0.0.0, metric 1, tag 0
> 4d15h: 192.168.1.0/24 via 0.0.0.0, metric 2, tag 0
> 4d15h: 192.168.2.2/32 via 0.0.0.0, metric 1, tag 0
> 4d15h: RIP: Update contains 4 routes
> 4d15h: RIP: Update queued
> 4d15h: RIP: sending v1 update to 255.255.255.255 via Ethernet0
> (172.31.12.2)
> 4d15h: RIP: build update entries
> 4d15h: subnet 172.31.25.0 metric 1
> 4d15h: subnet 172.31.25.5 metric 1
> 4d15h: network 192.168.2.0 metric 1
> 4d15h: RIP: Update contains 3 routes
> 4d15h: RIP: Update queued
> r2#
> 4d15h: RIP: Update sent via BRI0
> 4d15h: RIP: Update sent via Ethernet0
> r2#
> 4d15h: RIP: received v1 update from 172.31.12.1 on Ethernet0
> 4d15h: 172.31.10.0 in 1 hops
> 4d15h: 192.168.1.0 in 1 hops
> 4d15h: RIP: Update contains 2 routes
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-------------------------------------------------------------------------------------------------
This e-mail contains privileged information or information belonging to IDBI Bank Ltd. and is intended solely for the addressee/s. Access to this email by anyone else is unauthorized. Any copying (whole or partial) or further distribution beyond the original recipient is not intended, and may be unlawful.
The recipient acknowledges that IDBI Bank Ltd. is unable to exercise control or ensure or guarantee the integrity of the contents of the information contained in e-mail transmissions and further acknowledges that any views expressed in this message are those of the individual sender and are not binding on IDBI Bank Ltd. E-mails are susceptible to alteration and their integrity cannot be guaranteed. IDBI Bank Ltd. does not accept any liability for any damages caused on account of this e-mail.
If you have received this email in error, please contact the sender and delete the material from your computer.
-------------------------------------------------------------------------------------------------
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:40 GMT-3