From: Ken.Farrington@barclayscapital.com
Date: Sat Sep 27 2003 - 10:37:31 GMT-3
Good morning all,
RR
+----+
+---------| R1 |-----------+
| +----+ |
| |
+----+ +----+ lo0 1.1.1.1
| R2 | All in AS 555 | R3 |------------------
+----+ +----+
RRc RRc
I have the following above, and I am I am learning the 1.1.1.1 network via
iBGP on R1 from R3 and this is being reflected to R2, but the R2 router is
not putting this into it's routing table because the next hop in the BGP
table is unreachable.
So I tried to put on bgp next-hop-self on the RR (R1) to the neighbor for R2
but this has no affect.
I have never use RR before with the next-hop-self and assume now that this
does not would and I will have to use another method of setting the next hop
when the route reflects from R1 to R2.
Can one of you techies, please let me know if this is fact, that
next-hop-self is a no go on RRs?
Many thx indeed,
Ken
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:38 GMT-3