From: Peng Zheng (zpnist@yahoo.com)
Date: Sat Sep 27 2003 - 03:09:29 GMT-3
Same result.
--- Arifur Rahman <arahman@cisco.com> wrote:
> Hi
> On R5 you can add " dialer-group 1" and give a spin.
> that might help.
> Please let me know the final solution.
>
> thanks - Arif
>
> At 10:51 PM 9/26/2003 -0700, you wrote:
> >I configure ISDN, it works before, but now I can
> not
> >make it work.
> >
> >Below are config:
> >
> >R4:
> >
> >hostname Rack06R4
> >
> >username Rack06R5 password 0 cisco
> >interface BRI0
> > ip address 145.45.45.4 255.255.255.240
> > encapsulation ppp
> > dialer map ip 145.45.45.5 name Rack06R5 broadcast
> >5556001
> > dialer map ip 145.45.45.5 name Rack06R5 broadcast
> >5556002
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 50355550010101
> > isdn spid2 50355550020101
> > cdapi buffers regular 0
> > cdapi buffers raw 0
> > cdapi buffers large 0
> > ppp authentication chap callin
> >
> >
> >--------------
> >on R5:
> >
> >hostname Rack06R5
> >!
> >aaa new-model
> >aaa authentication ppp default local
> >aaa authorization network default local
> >username Rack06R4 password 0 cisco
> >interface BRI0
> > ip address 145.45.45.5 255.255.255.240
> > encapsulation ppp
> > isdn switch-type basic-ni
> > isdn spid1 50355560010101
> > isdn spid2 50355560020101
> > cdapi buffers regular 0
> > cdapi buffers raw 0
> > cdapi buffers large 0
> > ppp authentication chap
> >
> >-------------------------------
> >
> >When I tried sh isdn status on both, I got:
> >
> >Global ISDN Switchtype = basic-ni
> >ISDN BRI0 interface
> > dsl 0, interface ISDN Switchtype =
> basic-ni
> > Layer 1 Status:
> > ACTIVE
> > Layer 2 Status:
> > TEI = 109, Ces = 1, SAPI = 0, State =
> >MULTIPLE_FRAME_ESTABLISHED
> > TEI = 110, Ces = 2, SAPI = 0, State =
> >MULTIPLE_FRAME_ESTABLISHED
> > TEI 109, ces = 1, state = 5(init)
> > spid1 configured, no LDN, spid1 sent,
> >spid1 valid
> > Endpoint ID Info: epsf = 0, usid = 2,
> tid
> >= 1
> > TEI 110, ces = 2, state = 5(init)
> > spid2 configured, no LDN, spid2 sent,
> >spid2 valid
> > Endpoint ID Info: epsf = 0, usid = 4,
> tid
> >= 1
> > Layer 3 Status:
> > 0 Active Layer 3 Call(s)
> > Active dsl 0 CCBs = 0
> > The Free Channel Mask: 0x80000003
> > Total Allocated ISDN CCBs = 0
> >
> >-----------------
> >
> >But when I tried debug on Rack06R4, I got:
> >
> >00:39:26: BRI0: wait for isdn carrier timeout, call
> >id=0x803F
> >00:39:26: BR0 DDR: Dialing cause ip (s=145.45.45.4,
> >d=224.0.0.5)
> >00:39:26: BR0 DDR: Attempting to dial 5556001
> >
> >The calling number is correct. But can not connect
> to
> >Rack06R5.
> >
> >
> >What's the possible reason?
> >
> >How to debug this?
> >
> >Thanks for help.
> >
> >
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >The New Yahoo! Shopping - with improved product
> search
> >http://shopping.yahoo.com
> >
> >***Get your CCIE and a FREE vacation:
> Shop.GroupStudy.com***
>
>_______________________________________________________________________
> >Please help support GroupStudy by purchasing your
> study materials from:
> >shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:38 GMT-3