From: Alec (clapun@graduate.hku.hk)
Date: Fri Sep 26 2003 - 11:14:13 GMT-3
yes, ip rip trigger should be configured both way and also applied in p2p
interface.
alec
----- Original Message -----
From: <Ken.Farrington@barclayscapital.com>
To: <ccielab@groupstudy.com>
Sent: Friday, September 26, 2003 9:15 PM
Subject: ip rip trigger command
> Guys,
>
> Tell me if I am using the list too much, but another question.
>
> --------------r1-------------------------r2----------------
> lo200 FR p2p lo200
> 142.200.80.1 .1 142.200.20 .2 142.200.40.1
>
> If I use "ip rip trig" on only one of the interfaces (say R1), i would
> expect to see updates
> being received on R1 from R2 but R1 not sending updates to R2.
> This is not the case as below shows. They both send and receive
>
> If I enable it on both sides, it works fine and no updates get sent
(unless
> they are triggered)
>
> Is this the correct operation of this feature?
>
> Many thx
> Ken
>
>
>
> --------------------------------------------------------------------------
-- > -- > On R1 > > ! > interface Serial0/0.1 point-to-point > ip address 142.200.20.1 255.255.255.0 > ip rip triggered > frame-relay interface-dlci 104 > ! > router rip > version 2 > network 142.200.0.0 > no auto-summary > ! > > > 00:04:36: RIP: received v2 update from 142.200.20.2 on Serial0/0.1 > 00:04:36: 142.200.40.0/24 via 0.0.0.0 in 1 hops > 00:04:58: RIP: sending v2 update to 224.0.0.9 via Serial0/0.1 (142.200.20.1) > 00:04:58: RIP: build update entries > 00:04:58: 142.200.80.0/24 via 0.0.0.0, metric 1, tag 0 > > -------------------------------------------------------------------------- -- > - > > On R2 > > ! > interface Serial0.1 point-to-point > ip address 142.200.20.2 255.255.255.0 > frame-relay interface-dlci 401 > ! > ! > router rip > version 2 > network 142.200.0.0 > no auto-summary > ! > > > 00:07:07: RIP: sending v2 update to 224.0.0.9 via Serial0.1 (142.200.20.2) > 00:07:07: RIP: build update entries > 00:07:07: 142.200.40.0/24 via 0.0.0.0, metric 1, tag 0 > 00:07:32: RIP: received v2 update from 142.200.20.1 on Serial0.1 > 00:07:32: 142.200.80.0/24 via 0.0.0.0 in 1 hops > > -------------------------------------------------------------------------- -- > -- > > > ------------------------------------------------------------------------ > For more information about Barclays Capital, please > visit our web site at http://www.barcap.com. > > > Internet communications are not secure and therefore the Barclays > Group does not accept legal responsibility for the contents of this > message. Although the Barclays Group operates anti-virus programmes, > it does not accept responsibility for any damage whatsoever that is > caused by viruses being passed. Any views or opinions presented are > solely those of the author and do not necessarily represent those of the > Barclays Group. Replies to this email may be monitored by the Barclays > Group for operational or business reasons. > > ------------------------------------------------------------------------ > > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com*** > _______________________________________________________________________ > Please help support GroupStudy by purchasing your study materials from: > shop.groupstudy.com > > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:38 GMT-3