From: yu chunyan (yuchunyan@hotmail.com)
Date: Thu Sep 25 2003 - 19:38:31 GMT-3
R7 donot have to be trunk.The switch treat R7 to native vlan( 1 by default).
Bin.
>From: "seonghui" <seonghui@vads.com>
>Reply-To: "seonghui" <seonghui@vads.com>
>To: <ccielab@groupstudy.com>
>Subject: switchport access and switchport trunk on the same port
>Date: Thu, 25 Sep 2003 23:40:56 +0800
>
>Hi Group,
>
>Just out of curiousity, what does the below config mean:
>
>interface FastEthernet0/17
> description *** R7 ***
> switchport access vlan 567
> switchport trunk encapsulation dot1q
> switchport mode trunk
> no ip address
>
>Does it mean that R7 connected to switch port fas0/17 is on vlan567 and at
>the same time, R7 is also a dot1q trunk? Or this config is not valid at
>all?
>and cannot be applied under any environment.
>
>regards - SH
>
>***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:37 GMT-3