From: seonghui (seonghui@vads.com)
Date: Thu Sep 25 2003 - 13:18:42 GMT-3
Thanks Boyan,
I understand the function of the commands and what they do. My question was,
under what environment that we need both of them to be configured on the
same fastE port.
But after thinking about it, I think I asked quite a stupid
question...ignore me. This is just one of the many 'what-if' question that
suddenly pop-up in my mind while I am doing some scenarios.
-----Original Message-----
From: Boyan Krosnov [mailto:bkrosnov@lirex.bg]
Sent: Thursday, September 25, 2003 11:52 PM
To: seonghui; ccielab@groupstudy.com
Subject: RE: switchport access and switchport trunk on the same port
switchport trunk commands are only active when the port is in trunk
mode.
switchport access commands are only active when the port is in access
mode.
The config is valid. This is a trunk with all active vlans allowed.
"switchport access vlan 567" can be safely removed from the
configuration.
BR,
Boyan Krosnov, CCIE#8701
http://boyan.ludost.net/
just another techie speaking for himself
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of seonghui
> Sent: Thursday, September 25, 2003 6:41 PM
> To: ccielab@groupstudy.com
> Subject: switchport access and switchport trunk on the same port
>
>
> Hi Group,
>
> Just out of curiousity, what does the below config mean:
>
> interface FastEthernet0/17
> description *** R7 ***
> switchport access vlan 567
> switchport trunk encapsulation dot1q
> switchport mode trunk
> no ip address
>
> Does it mean that R7 connected to switch port fas0/17 is on
> vlan567 and at
> the same time, R7 is also a dot1q trunk? Or this config is
> not valid at all?
> and cannot be applied under any environment.
>
> regards - SH
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> ______________________________________________________________
> _________
> Please help support GroupStudy by purchasing your study
> materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
[GroupStudy removed an attachment of type application/ms-tnef which had a name of winmail.dat]
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:37 GMT-3