From: R&S Groupstudy (rsg@synergy-networking.co.uk)
Date: Tue Sep 23 2003 - 07:04:38 GMT-3
This may be because the router doesn't know what a "disk" is when it boots
up.
Consider upgrading the Bootflash with a newer version that understands ata
disks
Adam
> -----Original Message-----
> From: cisco_efiko@o2.co.uk [SMTP:cisco_efiko@o2.co.uk]
> Sent: Tuesday, September 23, 2003 10:54 AM
> To: SHARMA,MOHIT (HP-Germany,ex1); ccielab@groupstudy.com
> Subject: RE: OT:7500 IOS upgrade
>
> Hi,
>
> Have you solved this problem. Well if you hae not could you try changing
> the boot command to "slot1:rsp-pv-mz.123-1a.bin". I have seen this before
> just can't remember vividly what is it i did to resolve it.
>
> Let me know how you solve this when you do.
>
> Regards,
> Tayo
>
>
>
> >-- Original Message --
> >From: "SHARMA,MOHIT (HP-Germany,ex1)" <mohit.sharma@hp.com>
> >To: ccielab@groupstudy.com
> >Subject: OT:7500 IOS upgrade
> >Date: Sat, 20 Sep 2003 20:44:04 +0200
> >Reply-To: "SHARMA,MOHIT (HP-Germany,ex1)" <mohit.sharma@hp.com>
> >
> >
> >HI All,
> >
> >I am trying to upgrade the IOS on some of my client's 7500 routers. The
> >client has purchased some Flash cards ( not from Cisco) 128 MB. I can see
> >and format the flash cards on the router.(These are ATA cards).
> >I have used and tested then in my LAB which are also running 7500 but
> with
> >RSP2 (R4600), with this platform I have no issues in reloading the router
> >with the IOS 12.3.1a but when I put the same card on the client routers
> >(RSP4+ (R5000)), I can see the card with sh disk1: and dir disk1:,
> however
> >when I try to reload the card with the command boot system
> >disk1:rsp-pv-mz.123-1a.bin,
> >It gives me the following error-
> >Proceed with reload? [confirm]y
> >System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
> >Copyright (c) 2000 by cisco Systems, Inc.
> >
> >SLOT 7 RSP is system master
> >RSP4 platform with 262144 Kbytes of main memory
> >
> >open: read error...requested 0x4 bytes, got 0xfffffff8
> >trouble reading device magic number
> >loadprog: error - on file open
> >boot: cannot load "disk1:rsp-pv-mz.123-1a.bin"
> >
> >I also tried to make my RSP2 router a tftp and getting the IOS from there
> >but I stll get a read file error-
> >Sep 20 19:09:18.906 GMT: TFTP: unexpected read request
> >Sep 20 19:09:18.906 GMT: TFTP: Sending block 1 (retry 3), socket_id
> >0x430366A4
> >Sep 20 19:09:24.906 GMT: TFTP: unexpected read request
> >Sep 20 19:09:24.906 GMT: TFTP: Sending block 1 (retry 4), socket_id 0x430
> >Has anyone experienced this??I could not find any dependencies as bot
> RSP2
> >and RSP4 use the same file system.
> >Any suggestions or recommendations would be REALLY welcome.Would be a
> great
> >help to me, as I have already spent a lot of time trying to figure this
> out.
> >
> >Thanks,
> >
> >Mohit.
> >
> >***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
> >shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:34 GMT-3