From: fingham@cox.net
Date: Mon Sep 22 2003 - 19:10:48 GMT-3
Sujit: To test PC connectivity enable debug dlsw on the routers; use command "net view PC1" on PC2 where PC1 and PC2 are the configured NetBIOS names on the PC's. On the router which has PC2 connected you should see a debug line such as" received NetBIOS NameQuery from x.x.x to c000.0000.0080". And a "show dlsw re" should show PC2 as a local resource. Do the same on the other end. If you don't see the debug message or the PC name in the dlsw re local cache then you probably
don't have NetBIOS enabled on the PC's or don't have them attached to the correct interface.
If you need other help send debug output offline.
HTH, Fred
>
> From: "sujit" <sujitpanda123@hotmail.com>
> Date: 2003/09/22 Mon AM 07:20:08 EDT
> To: <Ken.Farrington@barclayscapital.com>, <ccielab@groupstudy.com>
> Subject: Re: Dlsw testing ?
>
> hi ,
>
> PC--R1-----R2 -----PC
>
> r1 and r2 are connected using ethernet
>
> config of R1 :
>
> dlsw local-peer peer-id 200.200.200.200
> dlsw remote-peer 0 tcp 100.100.100.100
> dlsw bridge-group 1
>
> int loop 33
> ip address 200.200.200.200 255.255.255.0
>
> int fa 0/0
> bridge-group 1
> no ip address
> desc --- connected to PC
>
> int fa 0/1
> ip address 172.16.9.66 255.255.255.0
>
> router eigrp 1
> network 172.16.0.0
> network 200.200.200.0
> no auto-summary
>
> bridge-group 1 protocol ieee
>
>
> Config of router 2:
>
> dlsw local-peer peer-id 100.100.100.100
> dlsw remote-peer 0 tcp 200.200.200.200
> dlsw bridge-group 1
>
> int loop 33
> ip address 100.100.100.100 255.255.255.0
>
> int fa 0/0
> bridge-group 1
> no ip address
> desc ---- connected to PC
>
> int fa 0/1
> ip address 172.16.9.65 255.255.255.0
>
> router eigrp 1
> network 172.16.0.0
> network 100.0.0.0
> no auto-summary
>
> bridge-group 1 protocol ieee
>
> -----
>
> IP reachability is fine using EIGRP
>
> show dlsw peers : >>>> works fine show in the connect state :-
>
> show dlsw capabilites >>>> show the capabilites of the remote peers
>
> Q >> I am not able to browse using computer names :-- this is the way i am
> testing
> Q >> show dlsw circuits show nothing
>
> if you need any more data/info pls. let me know
>
> regards
> Sujit
>
>
>
>
>
>
>
> ----- Original Message -----
> From: <Ken.Farrington@barclayscapital.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, September 22, 2003 4:14 PM
> Subject: RE: Dlsw testing ?
>
>
> > The only time I had a problem with this when using DLSW was when I was
> > trying DLSW over LLC2 (DLSWlite) and then it was down to an MTU issue, so
> > taking advice from someone else on the study group, I increased it to 1600
> > and it all kicked into life.
> >
> > Not saying this is your problem, but without more details, I cannot make a
> > decision?
> >
> > Thx
> >
> > -----Original Message-----
> > From: sujit [mailto:sujitpanda123@hotmail.com]
> > Sent: 22 September 2003 05:44
> > To: Ken.Farrington@barclayscapital.com; ccielab@groupstudy.com
> > Subject: Re: Dlsw testing ?
> >
> >
> > yes I have got every thing as far as config is concerened
> >
> > I am getting : CONNECT status in the show dlsw peer output
> >
> > pls. suggest how do I test the whether dlsw is working or not ??
> >
> > I have connected 2 windows PC and tried nebios .. to do data transfer ..
> but
> > ckt not coming up...
> >
> > regards
> > Sujit
> >
> > ----- Original Message -----
> > From: <Ken.Farrington@barclayscapital.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Monday, September 22, 2003 12:08 AM
> > Subject: RE: Dlsw testing ?
> >
> >
> > > have you got trans bridging enabled and the dlsw peer group mapped to
> > > the
> > TB
> > > bridge group?
> > >
> > >
> > > !
> > > dlsw local-peer peer-id 30.1.4.1
> > > dlsw remote-peer 0 tcp 30.1.2.1
> > > dlsw bridge-group 22
> > > !
> > > !
> > > interface Ethernet3
> > > no ip address
> > > media-type auto-select
> > > bridge-group 22
> > > !
> > > bridge 22 protocol ieee
> > >
> > >
> > > -----Original Message-----
> > > From: sujit [mailto:sujitpanda123@hotmail.com]
> > > Sent: 21 September 2003 17:12
> > > To: ccielab@groupstudy.com
> > > Subject: Fw: Dlsw testing ?
> > >
> > >
> > > Hi ,
> > >
> > > I am testing a simple dlsw+ setup :
> > >
> > > PC ( win 98) -- R1 --- R2 --- PC win NT
> > >
> > > dlsw peers are up ..
> > > show dlsw peers >> connect
> > >
> > > but I am not able to browse the computers ..
> > >
> > > thanks and regards
> > > Sujit
> > >
> > > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > > ______________________________________________________________________
> > > _
> > > Please help support GroupStudy by purchasing your study materials from:
> > > shop.groupstudy.com
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > ----------------------------------------------------------------------
> > > --
> > > For more information about Barclays Capital, please
> > > visit our web site at http://www.barcap.com.
> > >
> > >
> > > Internet communications are not secure and therefore the Barclays
> > > Group does not accept legal responsibility for the contents of this
> > > message. Although the Barclays Group operates anti-virus programmes,
> > > it does not accept responsibility for any damage whatsoever that is
> > > caused by viruses being passed. Any views or opinions presented are
> > > solely those of the author and do not necessarily represent those of
> > > the Barclays Group. Replies to this email may be monitored by the
> > > Barclays Group for operational or business reasons.
> > >
> > > ----------------------------------------------------------------------
> > > --
> > >
> > > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > > ______________________________________________________________________
> > > _
> > > Please help support GroupStudy by purchasing your study materials from:
> > > shop.groupstudy.com
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:33 GMT-3