From: sujit (sujitpanda123@hotmail.com)
Date: Mon Sep 22 2003 - 08:20:08 GMT-3
hi ,
PC--R1-----R2 -----PC
r1 and r2 are connected using ethernet
config of R1 :
dlsw local-peer peer-id 200.200.200.200
dlsw remote-peer 0 tcp 100.100.100.100
dlsw bridge-group 1
int loop 33
ip address 200.200.200.200 255.255.255.0
int fa 0/0
bridge-group 1
no ip address
desc --- connected to PC
int fa 0/1
ip address 172.16.9.66 255.255.255.0
router eigrp 1
network 172.16.0.0
network 200.200.200.0
no auto-summary
bridge-group 1 protocol ieee
Config of router 2:
dlsw local-peer peer-id 100.100.100.100
dlsw remote-peer 0 tcp 200.200.200.200
dlsw bridge-group 1
int loop 33
ip address 100.100.100.100 255.255.255.0
int fa 0/0
bridge-group 1
no ip address
desc ---- connected to PC
int fa 0/1
ip address 172.16.9.65 255.255.255.0
router eigrp 1
network 172.16.0.0
network 100.0.0.0
no auto-summary
bridge-group 1 protocol ieee
-----
IP reachability is fine using EIGRP
show dlsw peers : >>>> works fine show in the connect state :-
show dlsw capabilites >>>> show the capabilites of the remote peers
Q >> I am not able to browse using computer names :-- this is the way i am
testing
Q >> show dlsw circuits show nothing
if you need any more data/info pls. let me know
regards
Sujit
----- Original Message -----
From: <Ken.Farrington@barclayscapital.com>
To: <ccielab@groupstudy.com>
Sent: Monday, September 22, 2003 4:14 PM
Subject: RE: Dlsw testing ?
> The only time I had a problem with this when using DLSW was when I was
> trying DLSW over LLC2 (DLSWlite) and then it was down to an MTU issue, so
> taking advice from someone else on the study group, I increased it to 1600
> and it all kicked into life.
>
> Not saying this is your problem, but without more details, I cannot make a
> decision?
>
> Thx
>
> -----Original Message-----
> From: sujit [mailto:sujitpanda123@hotmail.com]
> Sent: 22 September 2003 05:44
> To: Ken.Farrington@barclayscapital.com; ccielab@groupstudy.com
> Subject: Re: Dlsw testing ?
>
>
> yes I have got every thing as far as config is concerened
>
> I am getting : CONNECT status in the show dlsw peer output
>
> pls. suggest how do I test the whether dlsw is working or not ??
>
> I have connected 2 windows PC and tried nebios .. to do data transfer ..
but
> ckt not coming up...
>
> regards
> Sujit
>
> ----- Original Message -----
> From: <Ken.Farrington@barclayscapital.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, September 22, 2003 12:08 AM
> Subject: RE: Dlsw testing ?
>
>
> > have you got trans bridging enabled and the dlsw peer group mapped to
> > the
> TB
> > bridge group?
> >
> >
> > !
> > dlsw local-peer peer-id 30.1.4.1
> > dlsw remote-peer 0 tcp 30.1.2.1
> > dlsw bridge-group 22
> > !
> > !
> > interface Ethernet3
> > no ip address
> > media-type auto-select
> > bridge-group 22
> > !
> > bridge 22 protocol ieee
> >
> >
> > -----Original Message-----
> > From: sujit [mailto:sujitpanda123@hotmail.com]
> > Sent: 21 September 2003 17:12
> > To: ccielab@groupstudy.com
> > Subject: Fw: Dlsw testing ?
> >
> >
> > Hi ,
> >
> > I am testing a simple dlsw+ setup :
> >
> > PC ( win 98) -- R1 --- R2 --- PC win NT
> >
> > dlsw peers are up ..
> > show dlsw peers >> connect
> >
> > but I am not able to browse the computers ..
> >
> > thanks and regards
> > Sujit
> >
> > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > ______________________________________________________________________
> > _
> > Please help support GroupStudy by purchasing your study materials from:
> > shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > ----------------------------------------------------------------------
> > --
> > For more information about Barclays Capital, please
> > visit our web site at http://www.barcap.com.
> >
> >
> > Internet communications are not secure and therefore the Barclays
> > Group does not accept legal responsibility for the contents of this
> > message. Although the Barclays Group operates anti-virus programmes,
> > it does not accept responsibility for any damage whatsoever that is
> > caused by viruses being passed. Any views or opinions presented are
> > solely those of the author and do not necessarily represent those of
> > the Barclays Group. Replies to this email may be monitored by the
> > Barclays Group for operational or business reasons.
> >
> > ----------------------------------------------------------------------
> > --
> >
> > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > ______________________________________________________________________
> > _
> > Please help support GroupStudy by purchasing your study materials from:
> > shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:33 GMT-3