From: navaid@rogers.com
Date: Thu Sep 18 2003 - 12:33:44 GMT-3
According to Doc. CD you need neighbor only on Hub that is router with high priority value.
Navaid
>
> From: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
> Date: 2003/09/18 Thu PM 12:35:56 EDT
> To: "christopher snow" <cbsnow31@yahoo.com>
> CC: <ccielab@groupstudy.com>
> Subject: Re: ospf neigbhor issue
>
> It is finally working, what I had was only one nei under the R3 which is a
> hub and has default priority 1 and R1 had Interface
> priority 0. After putting another nei command in r1. R 3 became the DR.
> Thanks all
>
>
> Kaiser A
> ----- Original Message -----
> From: "christopher snow" <cbsnow31@yahoo.com>
> To: "Kaiser Anwar" <kaiseranwar@sbcglobal.net>
> Cc: <ccielab@groupstudy.com>
> Sent: Thursday, September 18, 2003 5:59 AM
> Subject: Re: ospf neigbhor issue
>
>
> > Do all of what Navaid mentioned...
> >
> > Also ensure that the subnet masks match as this can be
> > a common error. Also make sure the neighbor statement
> > is on the hub (non 0 priority router).
> >
> > HTH
> >
> > Chris Snow
> >
> >
> >
> > --- Kaiser Anwar <kaiseranwar@sbcglobal.net> wrote:
> > > Hi,
> > > I have a simple about ospf NBMA multipoint
> > > interface. I have R1 connected
> > > to R3 with Frame relay map statements.
> > > I dont want to use ip ospf network staement. This
> > > is how i am doing, I dont
> > > know what i am missing.
> > > All I have on router 1 is network statement and
> > > on interface i have ip ospf
> > > priority 0 so it does not become BDR.
> > > R3 has nei statement for R1. This is what I get
> > > when using the show
> > > command. Thanks
> > >
> > >
> > >
> > > r3#o nei
> > >
> > > Neighbor ID Pri State Dead Time
> > > Address Interface
> > > N/A 0 ATTEMPT/DROTHER -
> > > 130.10.10.1 Serial0/0.1
> > >
> > > ***Get your CCIE and a FREE vacation:
> > > Shop.GroupStudy.com***
> > >
> > _______________________________________________________________________
> > > Please help support GroupStudy by purchasing your
> > > study materials from:
> > > shop.groupstudy.com
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site design software
> > http://sitebuilder.yahoo.com
> >
> > ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
1
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3