From: christopher snow (cbsnow31@yahoo.com)
Date: Thu Sep 18 2003 - 09:59:14 GMT-3
Do all of what Navaid mentioned...
Also ensure that the subnet masks match as this can be
a common error. Also make sure the neighbor statement
is on the hub (non 0 priority router).
HTH
Chris Snow
--- Kaiser Anwar <kaiseranwar@sbcglobal.net> wrote:
> Hi,
> I have a simple about ospf NBMA multipoint
> interface. I have R1 connected
> to R3 with Frame relay map statements.
> I dont want to use ip ospf network staement. This
> is how i am doing, I dont
> know what i am missing.
> All I have on router 1 is network statement and
> on interface i have ip ospf
> priority 0 so it does not become BDR.
> R3 has nei statement for R1. This is what I get
> when using the show
> command. Thanks
>
>
>
> r3#o nei
>
> Neighbor ID Pri State Dead Time
> Address Interface
> N/A 0 ATTEMPT/DROTHER -
> 130.10.10.1 Serial0/0.1
>
> ***Get your CCIE and a FREE vacation:
> Shop.GroupStudy.com***
>
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:30 GMT-3