From: Daniel Sheedy (dansheedy@gmx.net)
Date: Fri Sep 12 2003 - 07:41:57 GMT-3
Hallo Paul,
What if you use the following?
interface Serial0/1
ip address 10.1.48.1 255.255.255.248
ip pim nbma-mode
ip pim sparse-mode
Daniel Sheedy
----- Original Message -----
From: "Paul Chen" <cpjchen@starhub.net.sg>
To: <ccielab@groupstudy.com>
Sent: Friday, September 12, 2003 5:59 AM
Subject: Multicast- OSPF neighbor in Init state
> Hi Everyone,
>
>
>
> I am having this problem of establishing OSPF adj. between R2 and R5 over
a
> FR Cloud. The 2 neighbors are always stuck in a INIT state.
>
>
>
> This started when I configured multicast - ip pim sparse-dense-mode - on
> the multipoint serial interfaces.
>
>
>
> If I remove the 'ip pim sparse-dense-mode' the neighbors will revert back
to
> a FULL state.
>
>
>
> I tried using 'ip pim nbma-mode' to no avail. Anyway the IOS complains
the
> nbma-mode is not recommended for sparse-dense-mode.
>
>
>
>
>
> Any help appreciated.
>
>
>
>
>
> Thanks,
>
> Paul
>
>
>
>
>
>
>
> --------------------------------------------------------------------------
-- > ------- R2 > -------------------------------------------------------------------------- -- > --- > > > > interface Loopback0 > > ip address 136.10.2.2 255.255.255.0 > > ip pim sparse-dense-mode > > ! > > > > interface Serial1/0.1 point-to-point > > ip address 136.10.24.2 255.255.255.248 > > ip router isis > > isis password cisco > > frame-relay interface-dlci 104 > > ! > > interface Serial1/0.2 multipoint > > ip address 136.10.100.2 255.255.255.224 > > ip pim sparse-dense-mode > > ip ospf message-digest-key 5 md5 ipexpert5 > > ip ospf message-digest-key 6 md5 ipexpert6 > > ip ospf network point-to-multipoint non-broadcast > > frame-relay map ip 136.10.100.5 105 broadcast > > frame-relay map ip 136.10.100.6 106 broadcast > > no frame-relay inverse-arp > > > > > > router ospf 1 > > router-id 136.10.2.2 > > log-adjacency-changes > > area 0 authentication message-digest > > redistribute isis level-2 metric 44 subnets tag 444 > > redistribute rip metric 22 subnets tag 222 > > network 136.10.2.2 0.0.0.0 area 0 > > network 136.10.25.0 0.0.0.3 area 0 > > network 136.10.100.0 0.0.0.31 area 0 > > neighbor 136.10.100.5 cost 56 > > neighbor 136.10.100.6 cost 56 > > ! > > router isis > > net 49.0024.2222.2222.2222.00 > > is-type level-2-only > > metric-style wide > > summary-address 100.10.0.0 255.255.0.0 level-1-2 > > redistribute ospf 1 route-map ospf2isis > > redistribute rip metric 2 > > ! > > router rip > > version 2 > > timers basic 30 180 0 180 > > redistribute isis level-2 metric 2 > > redistribute ospf 1 metric 8 route-map ospf2rip > > passive-interface BRI0/0 > > network 136.10.0.0 > > > > > > > > ip pim send-rp-announce Loopback0 scope 16 group-list 22 > > ! > > ! > > access-list 22 permit 230.10.10.1 > > access-list 22 permit 230.11.11.1 > > access-list 22 permit 230.12.12.1 > > access-list 22 permit 230.13.13.1 > > access-list 22 permit 230.14.14.1 > > > > > > > > -------------------------------------------------------------------------- - > R5 > -------------------------------------------------------------------------- -- > ----------- > > > > > > > > > > interface Loopback0 > > ip address 136.10.5.5 255.255.255.0 > > ip pim sparse-dense-mode > > ip ospf network point-to-point > > > > > > interface Ethernet0 > > ip address 136.10.56.5 255.255.255.240 > > ip pim sparse-dense-mode > > ip ospf dead-interval 15 > > ip ospf priority 255 > > ip ospf mtu-ignore > > ip igmp join-group 230.11.11.1 > > ip igmp join-group 230.12.12.1 > > ip igmp join-group 231.12.12.1 > > > > > > interface Serial0 > > ip address 136.10.100.5 255.255.255.224 > > ip pim sparse-dense-mode > > encapsulation frame-relay > > ip ospf message-digest-key 5 md5 ipexpert5 > > ip ospf network point-to-multipoint non-broadcast > > frame-relay map ip 136.10.100.2 501 broadcast > > frame-relay map ip 136.10.100.6 501 broadcast > > frame-relay interface-dlci 501 > > class rtp > > no frame-relay inverse-arp > > frame-relay lmi-type ansi > > > > > > > > router ospf 1 > > router-id 136.10.5.5 > > log-adjacency-changes > > area 0 authentication message-digest > > network 136.10.5.5 0.0.0.0 area 0 > > network 136.10.25.0 0.0.0.3 area 0 > > network 136.10.56.0 0.0.0.15 area 3 > > network 136.10.100.0 0.0.0.31 area 0 > > neighbor 136.10.100.2 > > > > > > ip pim rp-announce-filter rp-list 2 > > ip pim send-rp-discovery Serial0 scope 16 > > > > access-list 2 permit 136.10.2.2 > > > _______________________________________________________________________ > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group. > > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:26 GMT-3