From: Alec (clapun@graduate.hku.hk)
Date: Fri Sep 12 2003 - 05:47:36 GMT-3
but my initial question is how to remove serial subif WITHOUT reload.
I'm sure reloading the router will work.
----- Original Message -----
From: "Jay Hennigan" <jay@west.net>
To: "Jung, Jin" <jin.jung@lmco.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, September 11, 2003 2:51 AM
Subject: RE: How to remove serial subif ?
> On Wed, 10 Sep 2003, Jung, Jin wrote:
>
> >
> >
> >
> > Try
> > No int ser 0/0/1
>
> This will probably result in an error message that you can't remove a
> physical interface.
>
> > And reload,,
> ^^^^^^^^^^^
> That's the problem. The original request was for a means to remove a
> frame-relay sub-interface completely without reloading. If, for example
> you have set a particular sub-interface as point-to-point and you want
> to change it to multipoint you will have issues.
>
> --
> Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
> WestNet: Connecting you to the planet. 805 884-6323 WB6RDV
> NetLojix Communications, Inc. - http://www.netlojix.com/
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:26 GMT-3