From: John Smith (c00per_omers1@yahoo.com)
Date: Fri Sep 05 2003 - 14:16:38 GMT-3
If I'm correct here, this because it is kept in memory, so when you remove it it says, it might not remove it completely, so you need to remove the config and then reboot, now memory is dumped and it will be gone.
Jay Hennigan <jay@west.net> wrote:
On Sun, 31 Aug 2003, Alec wrote:
> Hi group,
>
> If I wrongly configured a serial subif to be P2P, I can not change the link
> type to P2MP even if I remove and create the subif again. Are there any way
> to accomplish this without having reload the router ? Thanks.
Nope, but you can create a different sub-if as p2mp and ignore the old
one which will go away on a reload. Make sure to delete any frame DLCIs
etc. on the sub-if you delete if you need to reuse them.
-- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net WestNet: Connecting you to the planet. 805 884-6323 WB6RDV NetLojix Communications, Inc. - http://www.netlojix.com/
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:23 GMT-3