From: miken (miken@sisna.com)
Date: Tue Sep 09 2003 - 17:48:36 GMT-3
Correcton.....12.0(7)T. My apologies.
Thanks,
Mike N
----- Original Message -----
From: "miken" <miken@sisna.com>
To: "Yunming Song" <yunming_song@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, September 09, 2003 2:23 PM
Subject: Re: ISDN Spid status issue ?
> Looks like 12.1(7)T code to me. That code has a visual bug in it. If SPID1
> is truely invalid, it would never try to send SPID2.
>
> Thanks,
> Mike N
>
> ----- Original Message -----
> From: "Yunming Song" <yunming_song@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, September 09, 2003 8:47 AM
> Subject: ISDN Spid status issue ?
>
>
> > Hi group,
> >
> > I follow ALL-IN-ONE Cisco CCIE LAB Study Guide (2nd edition) Lab#2:
> > ISDN basics and switch basics by using VConsole ISDN simulator
> > with inital basic-ni setting, Router 1720 and 2621 with the following
> > result and setting. I always get the Spid status from 2621, which says
> > spid1/spid2 NOT VALID, but 1720 side is always fine.
> > I exchange the isdn ports and setting for 1720 and 2621,
> > the result for 2621 remains the same, I can't explain this ??
> >
> > thanks,
> > Yunming Song
> >
>
> --------------------------------------------------------------------------
> ---------------------------
> >
> > 2621# sh isdn status
> > .....
> > Layer 2 Status:
> > TEI = 66, State = MULTIPLE_FRAME_ESTABLISHED
> > TEI = 67, State = MULTIPLE_FRAME_ESTABLISHED
> > Spid status:
> > TEI 66, ces = 1, state = 8 (established)
> > spid1 configured, no LDN, spid1 sent, spid1 not valid
> > TEI 67, ces = 2, state = 8 (established)
> > spid2 configured, no LDN, spid2 sent, spid2 not valid
> > ...........
> >
> > ---------------------------------------------------------
> > 1720# sh run
> > ....
> > isdn switch-type basic-ni1
> >
> > interface bri0/0
> > ip address 196.1.1.1 255.255.255.0
> > encapsulation ppp
> > isdn spid1 408111111101
> > isdn spid2 408111111102
> > dialer idel-timeout 90
> > dialer map ip 196.1.1.2 name 2621 broadcast 4082222222
> > dialer load-threshhold 1
> > dialer-group 1
> > no fair-queue
> > ppp authentication chap
> > ppp multilink
> > !
> > dialer-list 1 protocol ip permit
> > ---------------------------------------------------------
> > 2621#sh run
> > ..........
> > isdn switch-type basic-ni1
> >
> > interface bri0/0
> > ip address 196.1.1.2 255.255.255.0
> > encapsulation ppp
> > isdn spid1 408222222201
> > isdn spid2 408222222202
> > dialer idel-timeout 90
> > dialer map ip 196.1.1.1 name 1720
> > dialer-group 1
> > no fair-queue
> > ppp authentication chap
> > ppp multilink
> > !
> > dialer-list 1 protocol ip permit
> >
> > _________________________________________________________________
> > Express yourself with MSN Messenger 6.0 -- download now!
> > http://www.msnmessenger-download.com/tracking/reach_general
> >
> >
> > _______________________________________________________________________
> > You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:25 GMT-3