From: Nawaz, Ajaz (Ajaz.Nawaz@bskyb.com)
Date: Tue Sep 09 2003 - 10:06:14 GMT-3
Chris
You need a modtap connector for converting US handset signal to UK.
suppliers RS do them.
ajaz
-----Original Message-----
From: Tony Schaffran [mailto:groupstudy@cconlinelabs.com]
Sent: 09 September 2003 14:03
To: 'Lord, Chris'; ccielab@groupstudy.com
Subject: RE: Getting Phones to Work in FXS Ports
Can you give us a config of your router? I assume you have this FXS VIC
installed in a 1V or 2V NM?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Lord, Chris
Sent: Tuesday, September 09, 2003 1:16 AM
To: ccielab@groupstudy.com
Subject: Getting Phones to Work in FXS Ports
Hi Group,
I would very much appreciate some help with this guys..... I am trying to
get a standard British Telecom phones to work in the FXS ports on my
routers. When I plug a phone into port 0 the phone rings continuously
whereas plugging it into port 1 leaves it dead. Neither ports seem to
respond to basic IOS config commands. I think I have eliminated equipment
faults because I've tried several phones in several FXS cards in several
routers. I'm using a BT (white) plug to RJ11 adaptor and I've tried several
of these as well.
I am wondering if FXS ports are designed for USA phones and aren't
compatible with BT phones unless some special IOS config or phone lead
configuration is done??? I've looked on the CIsco web site but can't find
anything about it.
Has anybody else in the UK had the same problem and managed to solve it?
Thanks in advance,
Chris.
**********************************************************************
The information contained in this email is confidential and is intended for
the recipient only. If you have received it in error, please notify us
immediately by reply email and then delete it from your system. Please do
not copy it or use it for any purposes, or disclose its contents to any
other person or store or copy this information in any medium. The views
contained in this email are those of the author and not necessarily those of
Lorien plc.
Thank you for your co-operation.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:25 GMT-3