From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Mon Sep 08 2003 - 16:06:33 GMT-3
And don't forget to use the right software client or patch your Windows box
or take
an another thirdparty dot1q client!
best regards
Oliver
-----Urspr|ngliche Nachricht-----
Von: boby2kusa@hotmail.com [mailto:boby2kusa@hotmail.com]
Gesendet: Montag, 8. September 2003 17:38
An: emad; ccielab@groupstudy.com
Betreff: Re: cat3550: port-based security
What and who is the authenticating server? Make sure the server is
configured correctly. the error message is pertaining to authentication
certificate. so the config works, it devices connected to it is getting
checked for authentication.
----- Original Message -----
From: "emad" <emad@zakq8.com>
To: <ccielab@groupstudy.com>
Sent: Monday, September 08, 2003 5:47 AM
Subject: cat3550: port-based security
> Folks,
> I was testing the dot1x security and after I did the below
> configurations and connected my laptop to this port it gave me "windows
> can't find the certificate to log you in" so , how can I authenticate
> my laptop!!!
>
> Switch# configure terminal
> Switch(config)# username Emad password 11
> Switch(config)# aaa new-model
> Switch(config)# aaa authentication dot1x default group default local
> Switch(config)# dot1x system-auth-control
> Switch(config)# interface fastethernet0/1
> Switch(config-if)# switchport mode access
> Switch(config-if)# dot1x port-control auto
> Switch(config-if)# end
>
> Regards
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:24 GMT-3