From: Rajagopal S (raj_ccie@yahoo.com)
Date: Fri Sep 05 2003 - 17:05:23 GMT-3
Hi John,
For totally stub area, i think we need to configure both the ABR and the internal router with no-summary command.
I just want to confirm here if ospf the stub area fields will match in case we configure differently on these routers. And after this command the area acts like a stub area and not as a totally stub area (with area stub in one router and area stub no-summary on the other).
Cheers
Raj
John Matijevic <matijevi@bellsouth.net> wrote:
Hello Rajagopal,
I believe you have configured a totally stubby area, when you configure this
you only configure one-side with the no-summary command.
Sincerely,
Matijevic
----- Original Message -----
From: "Rajagopal S"
To:
Sent: Friday, September 05, 2003 10:59 AM
Subject: OSPF STUB/TOT-STUB
> Hi group,
> I noticed a strange thing today...
>
> I was practicing on OSPF STUB and TOTALLY stub araes. I have 2 routers
connected on a point to point FR link.
>
> All characteristics of stub and totally stub are working fine.
>
> I changed the configurations of the routers such that one router was
configured for stub and another for totally-stub.
>
> I had changed the router's configs as below:
>
> Router - A :
>
> router ospf 1
> log-adjacency-changes
> area 1 stub no-summary
>
> Router - B:
> router ospf 1
> log-adjacency-changes
> area 1 stub
>
>
> Even after this, the OSPF neighbor relation was on and routing information
was like as a Stub area in Router - A. Is this possible ? Is it documented ?
>
> how can a stub and a totally stub area talk ? arent the stub fields
different for these?
>
> Cheers
> Raj
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:24 GMT-3