native vlan and port config for IP phone.

From: navaid@rogers.com
Date: Tue Sep 02 2003 - 14:31:05 GMT-3

• Next message: navaid@rogers.com: "Re: native vlan and port config for IP phone."
• Previous message: Jeff Ryan: "RE: VoiP solution"
• Next in thread: navaid@rogers.com: "Re: native vlan and port config for IP phone."
• Maybe reply: navaid@rogers.com: "Re: native vlan and port config for IP phone."
• Maybe reply: Roberts, Larry: "RE: native vlan and port config for IP phone."
• Maybe reply: Chen Kwong Wai William: "Re: native vlan and port config for IP phone."
• Maybe reply: Roberts, Larry: "RE: native vlan and port config for IP phone."
• Maybe reply: Marcus Jensen: "RE: native vlan and port config for IP phone."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

What is the correct method of configuring native vlan ?
Fa0/15 is using "switchport access vlan" command.
fa0/16 is using "switchport trunk native vlan" command.

interface FastEthernet0/15
 switchport access vlan 102
 switchport trunk encapsulation dot1q
 switchport voice vlan 101
 no ip address
 spanning-tree portfast
interface FastEthernet0/16
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 102
 switchport voice vlan 101
 no ip address
 spanning-tree portfast

Thanks,

Navaid

1

• Next message: navaid@rogers.com: "Re: native vlan and port config for IP phone."
• Previous message: Jeff Ryan: "RE: VoiP solution"
• Next in thread: navaid@rogers.com: "Re: native vlan and port config for IP phone."
• Maybe reply: navaid@rogers.com: "Re: native vlan and port config for IP phone."
• Maybe reply: Roberts, Larry: "RE: native vlan and port config for IP phone."
• Maybe reply: Chen Kwong Wai William: "Re: native vlan and port config for IP phone."
• Maybe reply: Roberts, Larry: "RE: native vlan and port config for IP phone."
• Maybe reply: Marcus Jensen: "RE: native vlan and port config for IP phone."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Oct 01 2003 - 07:24:21 GMT-3