From: Georg Pauwen (pauwen@hotmail.com)
Date: Fri Aug 29 2003 - 17:30:41 GMT-3
What would the config look like with policy routing on R3 ? I cannot see
this work without the tunnel interface sources being the serials known to
OSPF. Is the requirement to source the tunnel from the Ethernet interfaces ?
If so, the 4redistribute connected4 would work (provided the tunnel network
100.100.100.0 is part of OSPF).
Regards,
Georg
>From: "Roberto Adjakou" <radjakou@cfao.sn>
>Reply-To: "Roberto Adjakou" <radjakou@cfao.sn>
>To: <wwwjjang@chol.com>, <ccielab@groupstudy.com>
>Subject: RE : GRE-Tunnel's Question..!!
>Date: Fri, 29 Aug 2003 15:29:55 -0000
>
>Configure tunnels as required.
>On R3 configure policy routing for traffic for R1E0 destination!!
>
>
>Cordialement/Best regards;
>
>-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
>Roberto Adjakou
>E-mail : RAdjakou@cfao.sn
>-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
>
>
>-----Message d'origine-----
>De : wwwjjang@chol.com [mailto:wwwjjang@chol.com]
>Envoyi : vendredi 29 ao{t 2003 15:04
>@ : ccielab@groupstudy.com
>Objet : GRE-Tunnel's Question..!!
>
>Hi..Everyone..
>
>I'm trying to test a GRE-Tunnel,
>But i don't unserstand the question...
>
>Who knows the correct answer help me ..!!
>
>Thanks..
>
>
>---------
>Diagram
>---------
> |-----------------OSPF-----------------------------|
>(e0 1.1.1.1)-R1--(2.2.2.0/24)--R2--(3.3.3.0/24)--R3--(e0 4.4.4.1)
>
>-Every inteface of R1,R2 & R3, "except R1's E0", is in OSPF-Domain
>-So, R1 knows the route to the R3's E0 (4.4.4.1)
> But R3 does't know the route o the R1's E0(1.1.1.1)
>
>-----------
>Question
>-----------
>-Configure a tunnel from R1's E0 to R3's E0
> ->(In R1,Does this mean that Tunnel source is R1'E0
> & Tunnel-Destination is R3's E0 ??)
>-Configure the tunnel to use network 100.100.100.0/24
>-You never advertise the R1's E0 into the OSPF-Domain
> and never use any form of static/default-routing !!!
>-----------
>My Answer
>-----------
>-By using "redistrbute connect" under OSPF-process in R1,
> I can configure the tunnel.
> But the question dosen't accept that!!!
>
> => How can i solve this problem ???
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:10 GMT-3