From: Roberto Adjakou (radjakou@cfao.sn)
Date: Fri Aug 29 2003 - 12:29:55 GMT-3
Configure tunnels as required.
On R3 configure policy routing for traffic for R1E0 destination!!
Cordialement/Best regards;
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
Roberto Adjakou
E-mail : RAdjakou@cfao.sn
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-----Message d'origine-----
De : wwwjjang@chol.com [mailto:wwwjjang@chol.com]
Envoyi : vendredi 29 ao{t 2003 15:04
@ : ccielab@groupstudy.com
Objet : GRE-Tunnel's Question..!!
Hi..Everyone..
I'm trying to test a GRE-Tunnel,
But i don't unserstand the question...
Who knows the correct answer help me ..!!
Thanks..
---------
Diagram
---------
|-----------------OSPF-----------------------------|
(e0 1.1.1.1)-R1--(2.2.2.0/24)--R2--(3.3.3.0/24)--R3--(e0 4.4.4.1)
-Every inteface of R1,R2 & R3, "except R1's E0", is in OSPF-Domain
-So, R1 knows the route to the R3's E0 (4.4.4.1)
But R3 does't know the route o the R1's E0(1.1.1.1)
-----------
Question
-----------
-Configure a tunnel from R1's E0 to R3's E0
->(In R1,Does this mean that Tunnel source is R1'E0
& Tunnel-Destination is R3's E0 ??)
-Configure the tunnel to use network 100.100.100.0/24
-You never advertise the R1's E0 into the OSPF-Domain
and never use any form of static/default-routing !!!
-----------
My Answer
-----------
-By using "redistrbute connect" under OSPF-process in R1,
I can configure the tunnel.
But the question dosen't accept that!!!
=> How can i solve this problem ???
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:10 GMT-3