From: miken (miken@sisna.com)
Date: Wed Aug 27 2003 - 19:05:44 GMT-3
Larry,
Yes, that is how I would configure it to satisfy the requirement. Don't miss
the "needs RIPv2" part of it. Add version 2 under router rip:
router rip
version 2
Thanks,
Mike N
----- Original Message -----
From: "Larry Cain" <l_u_cain@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, August 27, 2003 3:06 PM
Subject: Unicast RIP
> Hi
>
> Have a requirement that needs RIPv2 between 2 routers on a LAN.
> Only these routers are to exchange routing info and do it via Unicast not
> Multi or Broadcast.
>
> Will the neighbor command work for this scenario?
>
>
> r1--------------e1----------------r2
> 10.108.20.1 10.108.20.2
>
> !r1
> router rip
> network 10.108.0.0
> passive-interface ethernet 1
> neighbor 10.108.20.2
>
> !r2
> router rip
> network 10.108.0.0
> passive-interface ethernet 1
> neighbor 10.108.20.1
>
> Or is there another way?
>
> Kind regards
> Larry
>
> _________________________________________________________________
> Tired of 56k? Get a FREE BT Broadband connection
> http://www.msn.co.uk/specials/btbroadband
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:08 GMT-3