From: rwo@mac.com
Date: Wed Aug 27 2003 - 18:03:49 GMT-3
This requires a level 15 user
username dt privilege 15 password 0 cisco
Bob
On Wednesday, August 27, 2003, at 01:24 PM, Tony Schaffran wrote:
> You have to enable ip http server on the router.
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA
> NNCDS, NNCSS, CNE, MCSE
>
> http://www.cconlinelabs.com/
> Your #1 choice for online cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> ccie2be
> Sent: Friday, August 22, 2003 3:16 PM
> To: Group Study
> Subject: IP http authentication local
>
> Hi all,
>
> I configured a router with above command and, of course, username dt
> password
> cisco, but I can't access the router via my IE explorer browser
> version 5.5.
>
> Here's the config:
>
> username dt password cisco
>
> ip http server
> ip http authentication local
>
> I checked that both username and pasword were entered in small case.
> And,
> if
> I remove the ip http authen local command, I get in without any
> problem.
> Anybody have any ideas as to why this isn't working?
>
> dt
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:08 GMT-3