From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Aug 26 2003 - 13:42:28 GMT-3
Change the OSPF hello interval or change the OSPF network type.
When the hello interval in changed the dead interval will automatically
be set to four times the hello interval assuming that the OSPF dead
interval hasn't been manually set.
By changing the OSPF network type the OSPF hello and OSPF dead intervals
will change according to the network type.
Broadcast - 10 Hello 40 Dead
Non-Broadcast - 30 Hello 120 Dead
Point-to-Multipoint - 30 Hello 120 Dead
Point-to-Point - 10 Hello 40 Dead
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-334-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tiffany Creighton
Sent: Tuesday, August 26, 2003 9:28 AM
To: ccielab@groupstudy.com
Subject: OSPF Dead-Interval
How can you change the OSPF dead-interval time without using the
dead-interval command?
Tiffany Creighton
CCIE Written,CCDP, CCNP, CCDA, CCNA, CNA
Vital Support Systems
Systems Engineer
515.334.5737 Direct
515.334.5757 Fax
515.710.5456 Mobile
[GroupStudy removed an attachment of type image/gif which had a name of
image001.gif]
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:07 GMT-3