From: rwo@mac.com
Date: Sat Aug 23 2003 - 23:46:36 GMT-3
ip ospf hello-interval 25
Remember, dead interval is 4 x hello:
r1#show ip ospf int s0.1
Serial0.1 is up, line protocol is up
Internet Address 135.3.34.1/24, Area 3
Process ID 3, Router ID 135.3.3.1, Network Type NON_BROADCAST, Cost:
64
Transmit Delay is 1 sec, State DR, Priority 100
Designated Router (ID) 135.3.3.1, Interface address 135.3.34.1
No backup designated router on this network
Timer intervals configured, Hello 25, Dead 100, Wait 100, Retransmit 5
^^
^^^
Hello due in 00:00:12
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
And
router ospf 12345
area 6 authentication (don't put "message-digest", so no encryption)
int fa0/1
ip ospf authentication-key 0 cisco
On Saturday, August 23, 2003, at 06:34 PM, Richard L. Pickard wrote:
> Anybody - any ideas? Thanks,
>
> Configure Area 6 so that is has a dead interval of 100 seconds without
> using
> the dead-interval command
>
> Configure Area 6 with clear text authentication
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3