From: rwo@mac.com
Date: Sat Aug 23 2003 - 23:29:21 GMT-3
On IOS 12.2:
r8#tclsh
r8(tcl)#foreach router {4.1.1.5 4.1.1.6 4.1.1.8} {ping $router}
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.1.1.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.1.1.6, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.1.1.8, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
r8(tcl)#tclquit
Bob
On Saturday, August 23, 2003, at 09:20 PM, Naga Sayeenathan wrote:
> What is the syntax to ping list of IP addresses using TCLSH script?
> Response
> would be really appreciated.
>
> TIA
> naga
>
>
> This transmission may contain protected health information, which is
> transmitted pursuant to an authorization or as permitted by law. The
> information herein is confidential and intended only for use by the
> designated recipient who/which must maintain its confidentiality and
> security. If you are not the designated recipient, you are strictly
> prohibited from disclosing, copying, distributing, or taking action in
> reliance on the contents hereof. If you have received this
> transmission in error, please notify the sender immediately and
> arrange for the return or destruction of all of its contents.
> Unauthorized re-disclosure of confidential health information is
> prohibited by state and federal law.
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:05 GMT-3