From: MMoniz (ccie2002@tampabay.rr.com)
Date: Mon Aug 18 2003 - 15:33:37 GMT-3
You can use the backup load option on your interfaces.
S0/0
backup int bri0
backup load 50
This will bring up the BRI at 50 % load
int bri0
diale load-threshold 128
ppp multilink.
This will bring up the second B channel at approximately 50 %
There is no backup interface option on BRI int's. But you can use multilink
groups to bundle them. But I would use a dialer interface for the group.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ccie2be
Sent: Monday, August 18, 2003 2:09 PM
To: Group Study
Subject: PPP Multilink
Hi,
Since PPP multilink allows different type interfaces to be bundle together
is
there a way to specify the order in which different links are brought up?
For example, say a router has a serial link that's permanently connected to
a
remote router and both the local and remote router also have bri interfaces
and async interfaces.
How would I configure the router so that at a certain load threshold, the
router brings up the first bri channel, and then the second B channel and
then
the async line?
Thanks, dt
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:01 GMT-3