From: Thomas Dean (tj_dean@hotmail.com)
Date: Mon Aug 18 2003 - 07:59:29 GMT-3
Hi Group
Following on from an earlier posting - ISDN dial watch Group.
The config works fine. When the watched route disappears the ISDN link
comes up.
The problem is that after the configured idle period, the line is dropped
and immediately is re-connected.
How can this flapping be stopped?
When the watched route comes back, the link stays up for the remains up to
the end of the idle period.
Is there a way of keeping the ISDN link up when the watched route is lost.
Then when the route comes back dropping the ISDN link after say 10sec.
The dialer list contains the access list with lines: deny ospf any any and
permt ip any any.
While the link is up no interesting traffic crosses it to keep it up.
If I remove the access list, the link comes up all the time because of OSPF
hellos.
Any help much appreciated!
Many thanks
Tom
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3