From: Scott Morris (swm@emanon.com)
Date: Sun Aug 17 2003 - 17:52:49 GMT-3
It's an interface load. So when only one channel is up, that represents
the interface. When two channels are up, THAT then represents the
interface.
(So if your load is 128 with one channel, and that triggers the second
channel, then your load subsequently will become 64) 'ish. :)
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peng Zheng
Sent: Saturday, August 16, 2003 6:57 PM
To: ccielab@groupstudy.com
Subject: dialer load
Is that the percentage of one channel or the
percentage of two channel?
For example:
Ask to bring up second link when bandwidth up to 50%
of one first channel.
SHould I use:
dialer load 63 either or
dialer load 127 either
Thanks.
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3