From: Anant Chakole (anantmc@rediffmail.com)
Date: Mon Aug 18 2003 - 01:01:20 GMT-3
Hi Peng
By default isdn interfaces uses only one channel unless you put either
ppp multilink command or dialer load threshold command..
So if you want to use second channel , you have to put some threshold
value and if u want to use both the channels simulteneously, then use
dialer load threshold 1 either & ppp multilink command.
Anant
Peng Zheng wrote:
>What's default bandwidth value for bri interface? 64
>or 128 ? Or every time I was asked for dialer load
>config, I should config bandwidth under interface?
>
>Thanks for help.
>
>--- Anant Chakole <anantmc@rediffmail.com> wrote:
>
>
>>Hi Peng
>>
>>It is the % load of the Interface and not the
>>individual channel. When
>>the load on the interface reaches the 50% of the
>>bandwidth then it
>>should dial the second channel automatically. As it
>>works on the scale
>>of 0 to 255, 127 will not satisfy the condition as
>>50% of 255 is 127.5,
>>so use the threshold value as 128. And by default it
>>applies on the
>>outbound interface if you have not mentioned
>>anything. So it is best
>>practice to use either statement at the end of the
>>command.
>>
>>Regards
>>Anant
>>
>>Peng Zheng wrote:
>>
>>
>>
>>>Is that the percentage of one channel or the
>>>percentage of two channel?
>>>
>>>For example:
>>>
>>>Ask to bring up second link when bandwidth up to
>>>
>>>
>>50%
>>
>>
>>>of one first channel.
>>>
>>>SHould I use:
>>>
>>>dialer load 63 either or
>>>dialer load 127 either
>>>
>>>Thanks.
>>>
>>>
>>>__________________________________
>>>Do you Yahoo!?
>>>Yahoo! SiteBuilder - Free, easy-to-use web site
>>>
>>>
>>design software
>>
>>
>>>http://sitebuilder.yahoo.com
>>>
>>>
>>>
>>>
>>_______________________________________________________________________
>>
>>
>>>You are subscribed to the GroupStudy.com CCIE R&S
>>>
>>>
>>Discussion Group.
>>
>>
>>>Subscription information may be found at:
>>>http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>
>>
>>
>_______________________________________________________________________
>
>
>>You are subscribed to the GroupStudy.com CCIE R&S
>>Discussion Group.
>>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>>
>>
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! SiteBuilder - Free, easy-to-use web site design software
>http://sitebuilder.yahoo.com
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3