From: Anant Chakole (anantmc@rediffmail.com)
Date: Sun Aug 17 2003 - 01:00:35 GMT-3
Hi Peng
It is the % load of the Interface and not the individual channel. When
the load on the interface reaches the 50% of the bandwidth then it
should dial the second channel automatically. As it works on the scale
of 0 to 255, 127 will not satisfy the condition as 50% of 255 is 127.5,
so use the threshold value as 128. And by default it applies on the
outbound interface if you have not mentioned anything. So it is best
practice to use either statement at the end of the command.
Regards
Anant
Peng Zheng wrote:
>Is that the percentage of one channel or the
>percentage of two channel?
>
>For example:
>
>Ask to bring up second link when bandwidth up to 50%
>of one first channel.
>
>SHould I use:
>
>dialer load 63 either or
>dialer load 127 either
>
>Thanks.
>
>
>__________________________________
>Do you Yahoo!?
>Yahoo! SiteBuilder - Free, easy-to-use web site design software
>http://sitebuilder.yahoo.com
>
>
>_______________________________________________________________________
>You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:54:00 GMT-3