From: Brown, Patrick (NSOC-OCF} (PBrown4@chartercom.com)
Date: Sat Aug 16 2003 - 18:23:46 GMT-3
MMoniz,
Do you have another NET configured on the router? If multiple NET's are
configured on the router, you must have the same system ID. This is not a
bug! Do a "no router clns" and a "no router isis".
HTH
Patrick B
-----Original Message-----
From: MMoniz
To: ccielab@groupstudy.com
Sent: 8/16/2003 3:14 PM
Subject: ISIS issue
Do you think this is a bug or what. After completely erasing my configs
and
power cycling my routers I start a new config.
When configuring ISIS it will not let me use any system ID other than
the
one I had configured prior. Even when configuring a different area than
was
before. My worry is if I do this in the lab and typo the system ID I
cannot
change it.
This happens on 12.1 and 12.2 code
R6(config)#ri 56.0009
R6(config-router)#net 56.0009.6666.0000.0000.66
%CLNS: System ID (6666.0000.0000.00) must not change when defining
additional area addresses
R6(config-router)#net 56.0009.6666.0000.0000.00
R6(config-router)#
Any ideas?
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:59 GMT-3