Local Route-maps (just to be sure)

From: Danny.Andaluz@triaton-na.com
Date: Mon Aug 11 2003 - 18:52:05 GMT-3

• Next message: CCIEStudy: "MPLS need to confirm"
• Previous message: ccie2be: "dlsw - is the peer-id in the local-peer statement really"
• Next in thread: Rajagopal S: "Re: Local Route-maps (just to be sure)"
• Maybe reply: Rajagopal S: "Re: Local Route-maps (just to be sure)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello, Group. When I configure an ip local policy route-map, this not only
includes traffic generated by the router but, also traffic passing through
it. Correct? I believe I have tested a scenario like this before and the
router also applied the route-map to traffic passing through it, but I don't
remember exactly. The following link says traffic generated by the router,
but does not mention traffic passing through the router.
 
http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp_r
/ind_r/1rfindp1.htm#1017871
<http://cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fiprrp_
r/ind_r/1rfindp1.htm#1017871>
 
Thanks,
Danny
 

Danny Andaluz
Network Engineer
Triaton, North America
908-541-6522

• Next message: CCIEStudy: "MPLS need to confirm"
• Previous message: ccie2be: "dlsw - is the peer-id in the local-peer statement really"
• Next in thread: Rajagopal S: "Re: Local Route-maps (just to be sure)"
• Maybe reply: Rajagopal S: "Re: Local Route-maps (just to be sure)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3