From: Alec (clapun@graduate.hku.hk)
Date: Mon Aug 11 2003 - 13:23:43 GMT-3
Only if you want to use ISIS to carry CLNS routes, it requires the command
"clns router isis".
- alec
----- Original Message -----
From: "Peng Zheng" <zpnist@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, August 12, 2003 12:04 AM
Subject: IS-IS config
> In some document:
>
> To configure Integrated IS-IS on a Cisco router, both
> the clns router isis and ip router isis commands must
> be enabled in interface configuration mode.
>
>
> But a lot of solution for ISIS only enable ip router
> isis under the interface, and it does work. Then,
> should I add clns router isis during the lab if asked
> for ISIS?
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3