Re: Voice Translation Rule

From: Cristian Henry H (chenry@reuna.cl)
Date: Mon Aug 11 2003 - 12:08:36 GMT-3

Has you tried with that alternative ?

dial-peer voice 1 pots
 destination-pattern 4411
 translate-outgoing called 1
 port 1/0/0

lg01 ha escrito:
>
> Hello, Group. Quick question on Voice's Translation Rules.
>
> translation-rule 1
> Rule 0 ^7 7711
>
> voice-port 1/0/0
> translate called 1
>
> dial-peer voice 1 pots
> destination-pattern 4411
> port 1/0/0
> !
> dial-peer voice 2 voip
> destination-pattern 7711
> session target ipv4:150.50.7.7
>
> Will the above config allow the phone to translate to 7711? Here's the requirement:
>
> Configure the voice ports on R4 & R7 with the extenstions of 4411 and 7711 respectively. R4 & R7 should utilize the IP infrastructure for all calls. If R4 dials the first digit of 7, calls should be routed to R7
>
> But when I press 7, nothing happens.... even though the "test translation-rule" output (please see below) seems to say that it should work.
>
> r4#test translation-rule 1 7
> The replaced number: 7711
>
> I have looked at the Doc CD too, but it's not clear.
>
> Thanks,
> Hunt
>
> _______________________________________________
> No banners. No pop-ups. No kidding.
> Introducing My Way - http://www.myway.com
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html 

-- 
Cristian E. Henry
REUNA

E-mail: chenry@reuna.cl
Fono: 56-2-3370336

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3