Voice Translation Rule

From: lg01 (lg01@myway.com)
Date: Mon Aug 11 2003 - 11:17:34 GMT-3

• Next message: Jason Cash: "Area 0 - OSPF vlink auth."
• Previous message: Jason Cash: "12.1(5)T clear frame inarp problem:"
• Next in thread: Cristian Henry H: "Re: Voice Translation Rule"
• Maybe reply: Cristian Henry H: "Re: Voice Translation Rule"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello, Group. Quick question on Voice's Translation Rules.

translation-rule 1
Rule 0 ^7 7711

voice-port 1/0/0
translate called 1

dial-peer voice 1 pots
destination-pattern 4411
port 1/0/0
!
dial-peer voice 2 voip
destination-pattern 7711
session target ipv4:150.50.7.7

Will the above config allow the phone to translate to 7711? Here's the requirement:

Configure the voice ports on R4 & R7 with the extenstions of 4411 and 7711 respectively. R4 & R7 should utilize the IP infrastructure for all calls. If R4 dials the first digit of 7, calls should be routed to R7

But when I press 7, nothing happens.... even though the "test translation-rule" output (please see below) seems to say that it should work.

r4#test translation-rule 1 7
The replaced number: 7711

I have looked at the Doc CD too, but it's not clear.

Thanks,
Hunt

• Next message: Jason Cash: "Area 0 - OSPF vlink auth."
• Previous message: Jason Cash: "12.1(5)T clear frame inarp problem:"
• Next in thread: Cristian Henry H: "Re: Voice Translation Rule"
• Maybe reply: Cristian Henry H: "Re: Voice Translation Rule"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3