From: Micah Byers (micah@myvine.com)
Date: Sun Aug 10 2003 - 09:01:49 GMT-3
That is correct. It does not affect authentication. It is also used to map
the IP address to the remote hostname that called if there is no LDN on that
map statement.
-Micah-
----- Original Message -----
From: "Alec Pun" <clapun@graduate.hku.hk>
To: <ccielab@groupstudy.com>
Sent: Sunday, August 10, 2003 1:55 AM
Subject: dialer map name command
> Hi group,
>
> I am not sure the use of the dial map name parameter. As far as I know,
this
> command has no impact on PAP & CHAP authentication. The only use that I
> figured out is when one router is configured for PPP callback. The called
> router will refer to this name parameter for locating the return call DN.
> Please correct if I made wrong assumptions, thanks.
>
> regards,
> alec
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:57 GMT-3