From: MMoniz (ccie2002@tampabay.rr.com)
Date: Fri Aug 08 2003 - 23:15:41 GMT-3
Well after I replied I found this. So I can remember something sometimes!!!!
Yeee Haaah
Hopefully I can for my lab!!!
http://www.patton.com/support/pdf/t1-e1-pri_tech_over_lo-res.pdf
-----Original Message-----
From: Mike Williams [mailto:ccie2be@swbell.net]
Sent: Friday, August 08, 2003 10:10 PM
To: 'MMoniz'; 'Tommy C'; ccielab@groupstudy.com
Subject: RE: E-1 channels
It's also been a while for me.... I thought in an E1 PRI, channel 15 is
a D channel. AFAIK, E1 PRI still only has a single D channel like T1
PRI. Also, AFAIK, if you're using straight E1 (not ISDN E1 PRI), you
should all all channels available just like with T1.
Mike W.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
MMoniz
Sent: Friday, August 08, 2003 7:04 PM
To: Tommy C; ccielab@groupstudy.com
Subject: RE: E-1 channels
hmmm I believe it is 0 16. 0 is used for control and 16 may be used for
CAS. It has been a while since I studied this.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tommy C
Sent: Friday, August 08, 2003 7:23 PM
To: ccielab@groupstudy.com
Subject: OT: E-1 channels
Can someone in the group tell me what channels in E-1 are set aside, not
carrying data?
Thanks,
Tommy
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:56 GMT-3