From: John Matijevic (matijevi@bellsouth.net)
Date: Fri Aug 08 2003 - 14:15:15 GMT-3
Hello Adam,
You cannot form an adjacency between a point-to-point and physical
interface.
Sincerely,
Matijevic
----- Original Message -----
From: "Adam Asay" <aasay@cerberian.com>
To: <ccielab@groupstudy.com>
Sent: Friday, August 08, 2003 1:06 PM
Subject: ISIS over Frame Relay
> I have a lab with the topology,
>
> router 1------------------router 2
>
> This is a point to point frame relay connection. Router 1 has a point
> to point subinterface of s 0/0.1. Router 2 does not have any
> subinterfaces. This is a lab requirement.
>
> When configuring ISIS on this link I can not get the routers to form
> adjacences. If I add a point to point subinterface to router 2 the
> problem goes away. I am told that this topology will work, but I am not
> able to find the solution. Does anybody know the solution to this?
>
> -Adam
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:56 GMT-3