From: Iwan Hoogendoorn (iwan@i-lusion.nl)
Date: Fri Aug 08 2003 - 02:57:47 GMT-3
Can you first try to put the password level to 0
ppp pap sent-username R5 password 7 104D000A061852
and where is your dialer map statement on Router6?
Bye
Quoting Alec Pun <clapun@graduate.hku.hk>:
> Hi group,
>
> I am trying PAP authentication over ISDN and hit into some problem. One
> side R5 is using dialer profile whereas the other one R6 is using legacy
> configuration. However, ISDN connection can't be established because of the
> PAP authentication failure.
>
> I've tried both sides using legacy configuration and it works. Grateful if
> any one can give me some hints, thanks.
>
> regards,
> alec
> ------------------------------------------------------------------------
>
> hostname R5
> !
> !
> username R6 password 0 cisco
>
> interface BRI0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-net3
> isdn spid1 81049306240101
> isdn spid2 81049306250101
> ppp pap sent-username R5 password 7 030752180500
> !
> interface Dialer1
> ip address 1.1.1.5 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer remote-name R6
> dialer string 4930622
> dialer-group 1
> pulse-time 0
> ppp authentication pap
> ppp pap sent-username R5 password 7 104D000A061852
> !
> dialer-list 1 protocol ip permit
>
>
> hostname R6
> !
> !
> username R5 password 0 cisco
>
> interface BRI0
> ip address 1.1.1.6 255.255.255.0
> encapsulation ppp
> dialer-group 1
> isdn switch-type basic-net3
> isdn spid1 81049306220101
> isdn spid2 81049306230101
> ppp authentication pap
> ppp pap sent-username R6 password 7 030752180500
> !
> ip classless
> ip http server
> !
> dialer-list 1 protocol ip permit
> !
>
> R5#ping 1.1.1.6
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 1.1.1.6, timeout is 2 seconds:
>
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> 1d20h: BR0:1 PPP: Treating connection as a callout
> 1d20h: BR0:1 PAP: O AUTH-REQ id 44 len 14 from "R5"
> 1d20h: BR0:1 PAP: I AUTH-NAK id 44 len 27 msg is "Authentication failure"
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
> 1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> 1d20h: BR0:1 PPP: Treating connection as a callout
> 1d20h: BR0:1 PAP: O AUTH-REQ id 45 len 14 from "R5"
> 1d20h: BR0:1 PAP: I AUTH-NAK id 45 len 27 msg is "Authentication failure"
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
> 1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> 1d20h: BR0:1 PPP: Treating connection as a callout
> 1d20h: BR0:1 PAP: O AUTH-REQ id 46 len 14 from "R5"
> 1d20h: BR0:1 PAP: I AUTH-NAK id 46 len 27 msg is "Authentication failure"
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
> 1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> 1d20h: BR0:1 PPP: Treating connection as a callout
> 1d20h: BR0:1 PAP: O AUTH-REQ id 47 len 14 from "R5"
> 1d20h: BR0:1 PAP: I AUTH-NAK id 47 len 27 msg is "Authentication failure"
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
> 1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> 1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> 1d20h: BR0:1 PPP: Treating connection as a callout
> 1d20h: BR0:1 PAP: O AUTH-REQ id 48 len 14 from "R5"
> 1d20h: BR0:1 PAP: I AUTH-NAK id 48 len 27 msg is "Authentication failure"
> 1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
> Success rate is 0 percent (0/5)
> R5#
> 1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
Iwan Hoogendoorn
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:55 GMT-3