From: Alec Pun (clapun@graduate.hku.hk)
Date: Fri Aug 08 2003 - 02:51:21 GMT-3
Hi group,
I am trying PAP authentication over ISDN and hit into some problem. One
side R5 is using dialer profile whereas the other one R6 is using legacy
configuration. However, ISDN connection can't be established because of the
PAP authentication failure.
I've tried both sides using legacy configuration and it works. Grateful if
any one can give me some hints, thanks.
regards,
alec
------------------------------------------------------------------------
hostname R5
!
!
username R6 password 0 cisco
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn spid1 81049306240101
isdn spid2 81049306250101
ppp pap sent-username R5 password 7 030752180500
!
interface Dialer1
ip address 1.1.1.5 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name R6
dialer string 4930622
dialer-group 1
pulse-time 0
ppp authentication pap
ppp pap sent-username R5 password 7 104D000A061852
!
dialer-list 1 protocol ip permit
hostname R6
!
!
username R5 password 0 cisco
interface BRI0
ip address 1.1.1.6 255.255.255.0
encapsulation ppp
dialer-group 1
isdn switch-type basic-net3
isdn spid1 81049306220101
isdn spid2 81049306230101
ppp authentication pap
ppp pap sent-username R6 password 7 030752180500
!
ip classless
ip http server
!
dialer-list 1 protocol ip permit
!
R5#ping 1.1.1.6
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.6, timeout is 2 seconds:
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
1d20h: BR0:1 PPP: Treating connection as a callout
1d20h: BR0:1 PAP: O AUTH-REQ id 44 len 14 from "R5"
1d20h: BR0:1 PAP: I AUTH-NAK id 44 len 27 msg is "Authentication failure"
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
1d20h: BR0:1 PPP: Treating connection as a callout
1d20h: BR0:1 PAP: O AUTH-REQ id 45 len 14 from "R5"
1d20h: BR0:1 PAP: I AUTH-NAK id 45 len 27 msg is "Authentication failure"
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
1d20h: BR0:1 PPP: Treating connection as a callout
1d20h: BR0:1 PAP: O AUTH-REQ id 46 len 14 from "R5"
1d20h: BR0:1 PAP: I AUTH-NAK id 46 len 27 msg is "Authentication failure"
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
1d20h: BR0:1 PPP: Treating connection as a callout
1d20h: BR0:1 PAP: O AUTH-REQ id 47 len 14 from "R5"
1d20h: BR0:1 PAP: I AUTH-NAK id 47 len 27 msg is "Authentication failure"
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
1d20h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
1d20h: BR0:1 PPP: Treating connection as a callout
1d20h: BR0:1 PAP: O AUTH-REQ id 48 len 14 from "R5"
1d20h: BR0:1 PAP: I AUTH-NAK id 48 len 27 msg is "Authentication failure"
1d20h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down.
Success rate is 0 percent (0/5)
R5#
1d20h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:55 GMT-3