From: Barney Gaumer (bagaumer@yahoo.com)
Date: Thu Aug 07 2003 - 17:10:42 GMT-3
Are there no TAG-Switching or MPLS guru's out there
with advice on this one.
One problem I think I'm having is the platform I'm
using. All 2500's except R1 which is a 2620.
Anyway... I've got async routing issues at the moment
(big surprise lol) and could use some advise.
If I run BGP on R4, R3 and R2 would seting policy
based on AS-Path work??
B
--- Barney Gaumer <bagaumer@yahoo.com> wrote:
> Can anyone help?
>
> How do you set up return to sender on IOS 12.0 and
> up? On my lab at home for fun I was going to load
> balance two routers using an old local director.
>
> At the moment I am just using static routes on
> everything.
>
> I think on R4 I need to do RTS or some kind of
> policy
> route to make sure traffic is returned back over the
> same link it arrived on.
>
> For right now I'm stumped???
>
>
>
> ---
> ___|
> / |----R4---------R2
> www | \ \
> server --- \ \ ---
> 192.168.99.100 \ \ |
> R3--------LD--R1---|----client
> | PC
>
--192.168.3.107
>
>
> R1) FA0/0.3 192.168.3.1
> R1) FA0/0.5 10.10.5.1
> R2) E0 10.10.5.2
> R2) S0 192.168.79.1
> R3) E0 10.10.5.3
> R3) S0 192.168.89.1
> R4) E0 192.168.99.1
> R4) S0 192.168.79.2
> R4) S1 192.168.89.2
> LD) Real 10.10.5.2
> LD) Real 10.10.5.3
> LD) Virtual 10.10.5.5 (bound to both real with
> general sticky pred. for 1 min.)
>
> Cheers,
>
> Barney
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:55 GMT-3