From: Barney Gaumer (bagaumer@yahoo.com)
Date: Wed Aug 06 2003 - 20:14:20 GMT-3
Can anyone help?
How do you set up return to sender on IOS 12.0 and
up? On my lab at home for fun I was going to load
balance two routers using an old local director.
At the moment I am just using static routes on
everything.
I think on R4 I need to do RTS or some kind of policy
route to make sure traffic is returned back over the
same link it arrived on.
For right now I'm stumped???
---
___|
/ |----R4---------R2
www | \ \
server --- \ \ ---
192.168.99.100 \ \ |
R3--------LD--R1---|----client
| PC
---
192.168.3.107
R1) FA0/0.3 192.168.3.1
R1) FA0/0.5 10.10.5.1
R2) E0 10.10.5.2
R2) S0 192.168.79.1
R3) E0 10.10.5.3
R3) S0 192.168.89.1
R4) E0 192.168.99.1
R4) S0 192.168.79.2
R4) S1 192.168.89.2
LD) Real 10.10.5.2
LD) Real 10.10.5.3
LD) Virtual 10.10.5.5 (bound to both real with
general sticky pred. for 1 min.)
Cheers,
Barney
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:54 GMT-3