From: Deluzio, Jamey A (Jamey) (deluzio@avaya.com)
Date: Fri Aug 01 2003 - 13:03:45 GMT-3
Right now I'm running 12.1(5)T14 on a 2500. I've also tested it, with
the same results on a 2600.
Jamey
-----Original Message-----
From: Sam Munzani [mailto:sam@munzani.com]
Sent: Friday, August 01, 2003 9:59 AM
To: Deluzio, Jamey A (Jamey); ccielab@groupstudy.com
Subject: Re: RMON testing issue
What IOS are you running? I had same issue with 12.0 version and it came
out
to be a bug in IOS. Try it on 12.1.4 and higher and everything will
start
working magically.
Sam
> I've been trying to test the RMON config from Cisco's page
> http://www.cisco.com/warp/public/477/RMON/18.pdf
>
> I've downloaded and installed KiwiSyslog and normal SNMP traps are
> working just fine.
>
> When I hit the rising-threshold and falling-threshold I'm getting my
log
> entries under "sh rmon event" but I'm not getting anything sent to the
> server.
>
> Event 2 is active, owned by me
> Description is HIGHOCTETS
> Event firing causes log and trap to community rmon, last fired
23:45:39
> Current log entries:
> index time description
> 1 23:43:19 HIGHOCTETS
> 2 23:44:53 HIGHOCTETS
> 3 23:45:39 HIGHOCTETS
>
> When I run debugs on snmp I see the normal traps being sent but I
don't
> seen anything when I reach my RMON thresholds.
>
> Any ideas would be appreciated.
>
>
>
> Jamey
>
>
>
This archive was generated by hypermail 2.1.4 : Tue Sep 02 2003 - 18:53:51 GMT-3