From: Jung, Jin (jin.jung@lmco.com)
Date: Wed Jul 30 2003 - 09:58:57 GMT-3
You must be using SRM, with sup1 and Msfc1,
Did you put the highavailbility versioning enable before you started the
upgrade?
If not you may have lost the images, or your Msfc started the sync in the
process of upgrade.
Boot to ROMMON and see what is on the flash of MSFCs.
Jin jung,,,
-----Original Message-----
From: Todd Veillette [mailto:tveillette@myeastern.com]
Sent: Tuesday, July 29, 2003 7:58 PM
To: ccielab@groupstudy.com
Subject: OT:65XX mmfc recovery
All,
Redundant sup1's both with msfc. Long story short upgrading msfc, with the
boot image on bootflash and the catos in slot0.
Via reset, switch sup, and/or switch console I can see the msfc's request as
in:
tftp:\\255.255.255.255\slot0:msfc_12.whatever.bin
which results in error opening tftp. I'm guessing the "slot0" shouldn't be
there, as this isn't part of the image's name.
Change the name to above - will it work?
If not, I think I need to bootrom chip and clear the bootldr and bootflash?
Oh the main problem here is my outage window is 1 hour if I'm lucky, once a
week.
Any feedback would be appreciated.
-TV
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:58 GMT-3