From: John Matijevic (matijevi@bellsouth.net)
Date: Tue Jul 29 2003 - 20:35:02 GMT-3
Hello,
I kindly disagree with the last statement, I have implemented it with .00
always, and have used subinterfaces and it has worked for me. What happens
if you subinterface is atm 0.234, then you cant set the selector bit to
.234. Just my .02 cents.
Sincerely,
Matijevic
----- Original Message -----
From: "Ian Stong" <istong@stong.org>
To: "'Jonathan V Hays'" <jhays@jtan.com>; "'Tomasz Szymanski'"
<tomasz.szymanski@trecom.pl>; <ccielab@groupstudy.com>
Sent: Tuesday, July 29, 2003 6:46 PM
Subject: RE: ATM selector byte???
> If you are using ATM subinterfaces with SVC's you will want to set the
> selector byte to the subinterface number. For example if you use ATM0.2
> your NSAP address would need to end with .02
>
>
> Ian
> www.ccie4u.com
> Rack Rentals and Lab Scenarios starting at $20
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Jonathan V Hays
> Sent: Tuesday, July 29, 2003 4:40 PM
> To: 'Tony Schaffran'; 'Tomasz Szymanski'; ccielab@groupstudy.com
> Subject: RE: ATM selector byte???
>
> He is referring to the last byte (last 2 hex digits) of an NSAP address.
> The more or less defunct LANE technology used the selector byte to
> differentiate among multiple services on the same switch.
>
> Not sure what it is used for otherwise - most examples have it set to
> 00.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Tony Schaffran
> Sent: Tuesday, July 29, 2003 4:24 PM
> To: 'Tomasz Szymanski'; ccielab@groupstudy.com
> Subject: RE: ATM selector byte???
>
>
> I am looking at the ATM cell structure. I do not see a selector byte.
> Can
> you elaborate?
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA
> NNCDS, NNCSS, CNE, MCSE
>
> http://www.cconlinelabs.com/
> Your #1 choice for online cisco rack rentals.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Tomasz Szymanski
> Sent: Tuesday, July 29, 2003 1:09 PM
> To: ccielab@groupstudy.com
> Subject: ATM selector byte???
>
> Hello,
>
>
> Can someone tell me what is the purpose of the selector byte in ATM?
>
>
> TS
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:58 GMT-3