From: wing_lam@jossynergy.com
Date: Mon Jul 28 2003 - 05:36:55 GMT-3
Hi group,
When configuring multilink between a pair of router connected by a pair of
serial link back to back, we have the following method:
1) Virtual Template
http://www.cisco.com/warp/customer/793/access_dial/mpp_serial.html
2) Multilink group
http://www.cisco.com/warp/customer/793/access_dial/ppp_11044.html
3) Dialer Profile
http://www.cisco.com/warp/customer/793/access_dial/pppmultilink.html
I have implemented all of the above and all works, but can anybody tell me
what is the criteria to design which method is suitable in which
environment?
Thx,
BBD (Big Black Dog)
DISCLAIMER:- This email is confidential and intended only for the use of
the individual or entity named above and may contain information that is
privileged. If you are not the intended recipient, you are notified that
any dissemination, distribution or copying of this email is strictly
prohibited. If you have received this email in error, please notify us
immediately by return email or telephone and destroy the original message.
Thank you.
This archive was generated by hypermail 2.1.4 : Wed Aug 06 2003 - 06:52:55 GMT-3